Cylinders are basically pipe, or tube shaped. To make them useful they have to be sealed off at at least one end. And the part that seals them off, where you often finds valves and stuff, is called a cylinder head.
No
The cylinder head is located on top of the engine. The spark plugs thread into the cylinder head(s).....
Cracks can be welded and then the head can be resurfaced.
Cylinder head 43Nm Cylinder head cover 10Nm
Start with undressing the cylinder head inlet and exhaust manifolds get a container for bolts and any other small stuff undo all of the cylinder head studs and lift off the cylinder head.
DOHC stands for Dual Over Head Cam : That means that each cylinder head has 2 camshafts on the top of the engine cylinder head ( in the case of the Ford Escort ZX2 , there is one cylinder head on the four cylinder engine so it has 2 camshafts on top of the cylinder head )
The purpose of the cylinder head is Luke Cooper
Cylinder Head Torque
To install a cylinder head temperature sensor on a F-250, you disconnect the cylinder head sensor from the electrical connector at the rear of the cylinder head. When installing the new one, you reverse the process of removal. The cylinder head temperature sensor is located by the O2 sensor.
Begin by removing the cylinder head from your Chevrolet S 10 four-cylinder engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder head to its original position.
Poo head
Under the cylinder head. you have to take the head off to find it.