answersLogoWhite

0

The draft (or draught) of a ship's hull is the vertical distance between the waterline and the bottom of the hull. It's a way to help determine the minimum depth of water that a boat or ship can safely navigate, and it is a way of indirectly expressing the amount of water that the boat displaces. On ships and large boats you will see numbered hash marks on the hull. they refer to the number of feet, yards or meters down into the water the hull goes. The amount of cargo and passengers on board, and the type of water, salt or fresh, impact the draft significantly. A heavily laden ship in fresh water will sit much lower in the water than the same boat, empty, in salt water.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Find St Maurice Boats In Canada?

what is the draft on a st. maurice 1990 cutlass?


What is a part of a yacht that is under water?

"all boats" have a draft, the part beneath the water. The part above is the freeboard. The part in the water is the Hull.


What is the term for the depth of the water needed to float a boat clear if the bottom?

The term for the depth of water needed to float a boat clear of the bottom is known as "draft." It measures the vertical distance between the waterline and the deepest point of the boat's hull. Boats with a deeper draft require more water for safe navigation.


What kind of engine is common on boats designed for shallow water?

Boats designed for shallow water commonly use outboard engines, particularly those with a lower horsepower and a shallow draft. These engines are often equipped with a trim and tilt feature, allowing the propeller to be raised to navigate through very shallow depths without damage. Additionally, some shallow-draft boats may utilize jet drives, which draw water from underneath and expel it out the back, providing thrust without the risk of hitting underwater obstacles.


Why aren't yachts jet drive?

Some companies make larger boats with jet drives. The benefit is a shallower draft. But jet drives are less efficient than propellers.


How wide is Gloucester canal?

The width of the canal varies but it is suitable for use by boats which are up to 64 metres in length, 9.6 metres in beam. The maximum draft is 3.5 metres.


What are the different kinds of boats?

There are sail boats, ugly boats, pretty boats, speed boats, fun boats, unfun boats, amazingness boats! i luv boats! i own a boat!!there are sail boats row boats speed boats paddle boats


What is viking boat draft?

A boat's draft usually refers to what depth of water the boat needs not to run aground. One of the features that made the vikings such succcesful raiders was that their boats, the Long ships, were both sea worthy enough to cross big stretches of open waters while still having a shallow enough draft so they could sail right up rivers and attack towns and settlements before they had time to defend themselves. Answer A viking boat draft is when you drAFT THE way that you are going to design the boat before you make it.


What has the author Joanna Ruane written?

Joanna Ruane has written: 'Boats, boats, boats' 'Boats, Boats, Boats'


Where boats are parked?

Boats "park" in a slip along the dock (or wharf) at the marina, possibly on the bay.Boats do not park, they moor (at anchorage) or dock in a slip.You park your boat in a slip along the dock at the marina. Or in a parking space on a storage lot if it is trailerable.Boats are 'parked' at a marina (or a port) dockside or in a slip. If they are large boats (like a freighter or an aircraft carrier, they are moored offfshore due to their deep draft.


What is the depth of a boat at its lowest point?

The depth of a boat at its lowest point, often referred to as the "draft," is the vertical distance between the waterline and the lowest point of the hull, which is typically the keel. This measurement is crucial for determining how deep a boat can safely navigate in water without running aground. Draft can vary based on the boat's load, design, and water conditions. For specific boats, the draft is usually listed in the manufacturer's specifications.


What are the breeds of draft horses?

draft breton dutch draft Irish draft latvian draft