0
Bus Cable
What else can I help you with?
What is A cable with terminators at each end and is shared by all nodes?
Bus Cable
What network topology has one central cable with terminators at each end?
The network topology that features one central cable with terminators at each end is known as a bus topology. In this configuration, all devices are connected to a single linear cable, known as the bus, which facilitates communication among them. This topology is relatively easy to set up and cost-effective for small networks, but it can suffer from collision issues and is less reliable than other topologies, as a failure in the central cable can disrupt the entire network.
At the ends of each bus network are 50-ohm resistors known as?
terminators
What happens when there is a break in the cable of the bus topology?
This sounds like a homework question.....hmmmm. Anyway- if there's a break in a bus topology, the nodes that are downstream from the break are cut-off from the rest of the network. In a ring topology, the nodes on both sides of the break will loop the path (self-healing) back towards the ring, so every node is still communicating with each other.
What is the windows network?
Several Computer nodes which are installed with any MS Windows OS and are connected with each other in peer (workgroup) or in domain model is called a Windows Network. Usually computers are connected in network with each other to utilize shared resources for maximum utilization. The most common shared resource which we can see is a printer.
How can Transmission media can be defined?
signal transmitted from transmitter to rfecevier is known as media transmission media divided in to two types guided unguided Transmission Media: All network nodes (computers and peripherals) are connected to each other and to the network by transmission media. A transmission medium establishes a communications channel between the nodes on a network and can take several forms: a. Networks can use existing wiring such as power lines b. Networks canuse additional cable to connect nodes c. Wireless networks use radio waves instead of wires or cable to connect nodes.
How do nodes connect to each other?
There are many networking protocol basics. Nodes are connected using these protocols.
Which type of wave has points called nodes that do not move?
Standing waves have points called nodes that do not move. These nodes are points of zero amplitude where the two interfering waves cancel each other out.
What is the minimum number of nodes in a binary tree with 3 levels?
In a binary tree, each level can have a maximum of (2^n) nodes, where (n) is the level number starting from 0. For a binary tree with 3 levels (0, 1, 2), the minimum number of nodes occurs when each level has at least one node. Therefore, the minimum number of nodes is 1 (at level 0) + 1 (at level 1) + 1 (at level 2) = 3 nodes.
Is Axillary lymph nodes the same with infraclavicular and supraclavicular lymph nodes?
No, axillary lymph nodes are not the same as infraclavicular and supraclavicular lymph nodes. Axillary lymph nodes are located in the armpit region and are primarily involved in draining lymph from the upper limb and breast. Infraclaviular lymph nodes are situated below the clavicle, while supraclavicular lymph nodes are located above the clavicle, each serving different drainage areas. Despite their proximity, they are distinct groups of lymph nodes with specific functions.
What is the relationship between the number of nodes and the wavelength in a n3 standing wave?
In a n3 standing wave, the relationship between the number of nodes and the wavelength is that there are 3 nodes present in the wave. Each node corresponds to a point of zero amplitude in the wave, and the wavelength is the distance between two consecutive nodes.
How many nodes not including endpoints are there in a standing wave that is two wavelengths long?
There would be three nodes in a standing wave that is two wavelengths long, excluding the endpoints. Each full wavelength has one node in the middle, so a wave that is two wavelengths long would have two nodes for each wavelength, plus an additional node at the center between the two wavelengths, totaling three nodes.
