0
What else can I help you with?
Lisa had an unknown clear liquid in a beaker. After heating on a hot plate the liquid evaporated but a white solid was left inside the beaker. Based on Lisa's investigation the original clear liquid?
The original clear liquid was likely a solution containing a solid dissolved in a liquid. When heated, the liquid portion evaporated, leaving behind the solid component. This process is known as evaporation and is commonly used to separate mixtures of solids dissolved in liquids.
What stages of the water cycle is most likely occurring on a clear hot sunny day?
On a clear hot sunny day, evaporation and transpiration are likely occurring. Evaporation is the process of water turning into water vapor from surfaces like oceans, lakes, and rivers, while transpiration is when plants release water vapor into the atmosphere through their leaves.
What is the process of removal of the clear liquid layer without disturbing the settled solid called?
The process of removing the clear liquid layer without disturbing the settled solid is called decantation. Decantation involves carefully pouring off the liquid while leaving the solid undisturbed at the bottom of the container.
Difference between evaporation and boiling?
The difference in evaporation and boiling is simple. Just imagine a beaker and being placed on the hot plate. The liquid it beginning to evaporate and the their is a gradient in the water because not all of the water is reaching 100 degrees Celsius at once. Some of it is beginning to evaporate (change in the state from a liquid to a gas) the other is beginning to boil! Remember boiling is a characteristic property and once it is reached the temperature doesn't continue to increase. Hope this helped!Vaporization if the phase change from a liquid to a gas. Evaporation and boiling are both mechanisms for vaporization to occur. Evaporation occurs at the surface of the liquid. It is the primary method by which water moves from bodies of water into the atmosphere. It is a much slower process than boiling. Boiling occurs when a liquid is heated to the boiling point. During boiling, water evaporates throughout the entire liquid very fast, rather than just at the surface.Evaporation happens only at the surface of a liquid and occurs at any temperature (so long as the substance is a liquid at that temperature). However, as most people are aware, liquids evaporates faster at a higher temperature. Boiling, on the other hand, happens throughout the bulk of a liquid, usually starting from some site on the inside of the container and rising in a bubble to the surface. It only happens when the temperature is above the boiling point of that substance.
What is the purpose of using clear hardening liquid in the process of creating resin art?
The purpose of using clear hardening liquid in resin art is to solidify and strengthen the resin, creating a durable and glossy finish for the artwork.
What color is liquid codeine?
look like liquid
What is the difference between sedimentation and decantation?
Sedimentation:- The process of settling down of heavier insoluble particles from mixture is called sedimentationDecantation:- the process of transferring the clear liquid without disturbing the sediments is called DecantationSupernatant :- the clear liquid above the sediments is called supernatant.so basically sedimentation lets the sediments settle down, and once they are settled, removing of the liquid (supernatant) above the settled sediments is called Decantation.Sedimentation is the deposition of the phase more dense or insoluble from a mixture.Decantation is a process of a mixture separation; the top layer of liquid is extracted.These two phenomenons are very related.
Eat applesause on clear liquid diet?
No apple sauce is not a clear liquid! =)
What color is the liquid ivomec?
crystal clear
Differentiate between evaporation and boiling?
Some key points are 1) Evaporation takes internal energy while for boiling we have to provide external energy or we have to reduce the pressure. 2) As Evaporation takes internal energy therefore evaporation results in cooling while this is not observed in boiling. 3) Evaporation can occur below saturated temperature while Boiling occurs only at and above saturated temperature. 4) Evaporation occurs at only at the liquid/vapor interface while Boiling may occur at a solid/liquid interface. 5) Vapor bubbles are formed in Boiling while in Evaporation there are no bubble formation and no bubble motion. 6) There are different regimes of boiling (like nucleate boiling, transition boiling, film boiling etc.) while these regimes are not present in Evaporation. 7) Rate at which a substance changes from liquid to vapor through Evaporation is much slower than when Boiling. 8) Example of Evaporation are Water in a lake at 20°C, evaporates to air at 20°C and 60 percent relative humidity since the saturation pressure of water at 20°C is 2.34 kPa, and the vapor pressure of air at 20°C and 60 percent relative humidity is 1.4 kPa. Other examples of evaporation are the drying of clothes, fruits, and vegetables; the evaporation of sweat to cool the human body; and the rejection of waste heat in wet cooling towers. i am hoping that the above comparison will give you the clear picture about the evaporation and boiling.
A clear liquid in an open container is allowed to evaporate and after three days a solid is left in the container so was the clear liquid an element a compound or a mixture and how do you know?
The clear liquid was most likely a mixture since only mixtures can separate through evaporation to leave behind the components in their original forms. Elements and compounds do not separate this way. The solid left behind may indicate that one of the components in the mixture had a lower boiling point than the others.
What is the difference between eaporation and boiling?
i think that u were asking about the difference between evaporation and boiling. Some key points are 1) Evaporation takes internal energy while for boiling we have to provide external energy or we have to reduce the pressure. 2) As Evaporation takes internal energy therefore evaporation results in cooling while this is not observed in boiling. 3) Evaporation occurs below saturated temperature while Boiling occurs at and above saturated temperature. 4) Evaporation occurs at liquid-vapor interface while Boiling occurs at solid liquid interface. 5) Vapor bubbles are formed in Boiling while in Evaporation there are no bubble formation and no bubble motion. 6) There are different regimes of boiling (like nucleate boiling, transition boiling, film boiling etc.) while these regimes are not present in Evaporation. 7) Rate of Evaporation is much slower than the Boiling. 8) Example of Evaporation are Water in a lake at 20°C, evaporates to air at 20°C and 60 percent relative humidity since the saturation pressure of water at 20°C is 2.34 kPa, and the vapor pressure of air at 20°C and 60 percent relative humidity is 1.4 kPa. Other examples of evaporation are the drying of clothes, fruits, and vegetables; the evaporation of sweat to cool the human body; and the rejection of waste heat in wet cooling towers. i am hoping that the above comparison will give you the clear picture about the evaporation and boiling.
