0
A 'gated audio mixer' may refer to a sound mixer that has a processor included in it. Basic mixers do not have this function, but some installation mixers found in places such as restaurants and churches have a 'gate' function that cuts off the microphone input below a certain level, so that background noise is not amplified through the PA system.
In pro audio mixing for live music, a gate is used to isolate particular sounds in a microphone setup so that the channel the microphone is connected to controls only that particular sound. Commonly, a drum set will be set up with gates on each of the tom mics so that each mic's channel only picks up the sound of the particular drum, making volume adjustment and tone control easier.
What else can I help you with?
How do you connect an audio interface to a mixer?
To connect an audio interface to a mixer, you typically use audio cables to connect the output of the audio interface to an input on the mixer. This allows you to route audio signals from the interface to the mixer for further processing or mixing.
How do I connect an audio interface to a mixer?
To connect an audio interface to a mixer, you will need to use audio cables. Connect the output of the audio interface to an input on the mixer using the appropriate cables. Adjust the levels on both the interface and the mixer to ensure proper sound quality and balance.
What is a powered audio mixer used for?
A powered audio mixer is used for combining, mixing, routing and changing the level, timbre or dynamics of audio signals. They can mix analog or digital signals depending on the mixer.
How can I connect a mixer to an audio interface?
To connect a mixer to an audio interface, use balanced cables to connect the mixer's main outputs to the audio interface's line inputs. Adjust the levels on the mixer and interface to ensure proper signal flow and avoid clipping.
How can I connect multiple audio sources to a mixer with stereo inputs?
To connect multiple audio sources to a mixer with stereo inputs, you can use audio cables to connect the output of each source to a separate channel on the mixer. Make sure to use the appropriate cables and adjust the levels on the mixer to balance the audio from each source.
Can you fry an audio mixer that uses 15v by using a 12v power supply?
, No. I did it powering a 15V peavey audio mixer using a lead acid 12V battery. But depending of your audio mixer, you may have levels problems. Emmanuel
Inventor of audio mixer?
Herbert Johnson
What is the purpose of a Rane mixer?
A Rane mixer is a brand of studio microphone and audio mixers for the production of audio tracks. They commonly feature eight inputs that can be manipulated to create the audio mixture one desires.
How can I connect an audio interface to a mixer for optimal sound quality and performance?
To connect an audio interface to a mixer for the best sound quality and performance, use balanced cables to connect the audio interface outputs to the mixer inputs. Set the levels correctly on both devices to avoid distortion and ensure a clean signal. Adjust the settings on the mixer and audio interface to match the desired sound quality and performance requirements.
How can I connect a microphone to speakers?
To connect a microphone to speakers, you will need an audio mixer or amplifier. Plug the microphone into the mixer or amplifier using an XLR cable. Then connect the mixer or amplifier to the speakers using audio cables. Adjust the volume levels on the mixer or amplifier to ensure proper sound output.
What is the main purpose of a mixer?
cake to mix cakes. concrete to mix concrete audio to mix various audio signals mixer valve, to tune the radio and to produce a signal for IF amplification.
What is another name for mixing desks?
There are many different names for mixing desks. These names include "sound board", "mixing console", audio production console", "mixer" and "audio mixer".
