You may be referring to a " hockey stick. " This is a short glass rod bent in a hockey stick shape and it is used to spread cells on a cell plate after they have been delivered to the plate by microliter pipette.
The spreader can be cooled by putting in alcohol (70% ethanol) which can also sterlize it, but it should be avoided to put the spreader instantly in the alcohol as it can be break if made of glass rod so do it when spreader is not to hot.
There are mainly two techniques in microbiology in bacterial cell inoculation. The first is when the colony is added to the plate and spread with a spreader across the entire plate in aseptic conditions. The second is called 16-streak and is used to isolate a single colony
to spread flame
glass feels smooth and glass is made from sand and water =]
abiotic
The spreader which is dipped in the alcohol is flamed, the fire will burn off on the spreader. It is sterilized now and could be used in the experiment.
The spreader can be cooled by putting in alcohol (70% ethanol) which can also sterlize it, but it should be avoided to put the spreader instantly in the alcohol as it can be break if made of glass rod so do it when spreader is not to hot.
There is a room in Magmoor Caverns called the Shore Tunnel. If you scan the glass in the tunnel, a certain area will say "Bendezium reinforced glass." So use a Power Bomb to break it. The Ice Spreader is on a platform floating in the lava.
There is a conversion matrix on Earthway's site to get the conversion from a Scott's spreader to an Earthway spreader. It is easiest to add 10. For example, Scott's spreader set at 4 should be set at 14 for an Earthway spreader set.
The spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.
Spreader settings for Scotts manufactured spreaders are listed on the back of the bag.
the same
What is the Ortho Spreader 5000 for overseeding
Conversion Chart for Scott's Easy Green Spreader.
You don't need to add hydraulics for the spreader (although you would for the plow). There is electrical work to be done for the spreader controls, however.
it's just called a crepe spreader
super-spreader, a person capable of infecting unusually high numbers of contacts