answersLogoWhite

0

The one that comes in the box with new pads. If none in the box, get a tube of it at the auto supply store.

You do not need an adhesive when installing new brake pads.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you change front brake pads on 2003 beetle?

put new disks and pads in my 2005 V beetle bleed them and brake pedal still not to the top go down about 2inchs how do i get a nice hard pedal


Can new carpet be glued to existing carpet on stairs?

No. Carpet that is to be glued down must have a clean, smooth and sound surface prior to installation. It is necessary to remove the existing carpet before installing the new. Scrape away any old adhesives best as possible, vacuum, use a premimum adhesive or contact adhesive, and press the new carpet into the adhesive to get a good transfer.


How do you fix chipped disks?

unfortunately they have not developed a cheap system to fix chipped disks so your going to have to get a new one


What to do with the new disc's that came with my new computer?

Save them. If you computer crashes or you forget your Password, you will need the disks to fix the problem. Under NO CIRCUMSTANCES should you discard or destroy the disks.


How do you convert from drums to disks on willys cj2a?

To convert from drum brakes to disc brakes on a Willys CJ2A, you will need a disc brake conversion kit, which typically includes new calipers, rotors, and mounting brackets. Begin by removing the existing drum brake components and installing the new brackets on the axle. Then, mount the rotors and calipers, ensuring that all components are securely attached and aligned. Finally, connect the brake lines and bleed the brake system to remove any air before testing the brakes.


Why the steering wheel shakes when you step on the brake pedal with new brake pads of Honda Acc 01 do you need to change the disks or do the bleeding?

Sounds like you didn't have the rotors turned when you replaced the pads. Either have the rotors turned down, or replace them with new ones and the shaking will stop. Also make sure there is nothing between the rotor and the hub, this would cause a problem as well.


How do you fix grinding noise on new front brake pads on a daewoo matiz?

It is not good if a persons newly changed brake pads are grinding. To stop this, a person needs to change the brake caliper pressure.


If a used car was supposed to be serviced and checked is the garage liable if it needs new pads and disks to pass an MOT after only 4000 miles?

ONLY if you PAID them to replace the brake pads and nothing else caused the quick wear of the pads.


Can linolium be laid on painted floor?

Yes. If the paint is sticking well to the original floor and the adhesive for the new flooring sticks to the paint, you are good to go.


What is the hink pink for Fresh Adhesive?

new glue


What is hink pink fresh adhesive?

new glue


What is hink pinks for fresh adhesive?

new glue