0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What Are The 4 Bunsen Burner Flames?
The four(4) flame types of Bunsen burner is depending on flow through the throat holes (holes on the side of the Bunsen burner -- not to be confused with the needle valve for gas flow adjustment). 1) air hole closed (Safety flame used for when not in use or lighting). 2) air hole slightly open. 3) air hole half open. 4) air hole almost fully open (this is the roaring blue flame).
When should you use a Bunsen burner with the collar half open?
because it can harm you or your clothes so you should never play around with half open burners they let out blue flame which is very dangerous because it is the dirtiest falme
What is a gentle flame on a Bunsen burner?
A gentle flame is not too hot and not too cold, the air hole should be half open for a gentle flame and it makes a hissing sound. Hope this helps- :D xx
What apparatus would you need for the hydrogen test?
You do the same test as you would have done in year 7, the pop test. Invert a test tube and fill partially with the gas then place a lit match or candle at the bottom if you hear a pop you have hydrogen. just don't be like my old teacher and fill it to the point half the room catches fire. Hope this helps
What is half of pi?
half pi = 1.57079633
What is the colour of a half-opened Bunsen burner?
Orange??
Will the flame be steady if the air hole of the Bunsen burner is half opened?
No, the flame will not be steady if the air hole of the Bunsen burner is half opened. Adjusting the air hole affects the air-to-fuel ratio needed for combustion. A half-open air hole may result in an incomplete combustion, leading to an unstable or flickering flame. Adjust the air hole until a steady blue flame is achieved.
Is it steady if a Bunsen burner's air hole is half open?
No, having the air hole half open on a Bunsen burner can lead to an unstable flame. It is important to adjust the air hole based on the type of flame required for the experiment being conducted.
What is the name of the flame in Bunsen burners when the air hole is half opn?
The flame in a Bunsen burner with the air hole half open is called a yellow, luminous flame. This type of flame is inefficient as it produces soot and is cooler compared to a blue flame. Adjusting the air hole helps control the type of flame produced by the Bunsen burner.
What is a half open flame used for on a Bunsen burner?
A half-open flame on a Bunsen burner is used for heating solutions gently. It provides a more diffuse heat compared to a fully open flame, which is useful for tasks where overheating or boiling over needs to be avoided.
What is the colour of a flame on the Bunsen burner when the whole is half open?
The flame on a Bunsen burner will be yellow with a small light blue inner cone when the hole is half open. This indicates a partially open air hole allowing for both incomplete combustion (yellow) and complete combustion (blue).
What happens when air hole in Bunsen burner is half open?
A hot flame is obtained (but not the hottest) with a color violet-white.
What is the sound of the Bunsen burner when the air hole is half open?
When the air hole of a Bunsen burner is half open, the sound produced is usually a low-pitched roaring noise, indicating that the flame is receiving the right amount of air for combustion. It should be a steady sound, with a stable flame. Adjusting the air hole helps control the intensity of the flame.
What is name of half open flame on Bunsen burner?
because it can harm you or your clothes so you should never play around with half open burners they let out blue flame which is very dangerous because it is the dirtiest falmeRead more: When_should_you_use_a_Bunsen_burner_with_the_collar_half_open
What is the colour of the Bunsen burner when it is halfway closed?
When the hole of a Bunsen burner is half closed (or half open) the flame is mostly blue-violet in color throughout, with no orange/yellow apparent as it would be with the hole fully closed. When the hole is fully open, the flame divides into a pale voilet color outer part with a cone of intense blue color within.
What Are The 4 Bunsen Burner Flames?
The four(4) flame types of Bunsen burner is depending on flow through the throat holes (holes on the side of the Bunsen burner -- not to be confused with the needle valve for gas flow adjustment). 1) air hole closed (Safety flame used for when not in use or lighting). 2) air hole slightly open. 3) air hole half open. 4) air hole almost fully open (this is the roaring blue flame).
What happens when a Bunsen burner air hole is half open?
When the air hole is opened completely then the flame would turn blue indicating it is very hot. If you closed it the flame will be yellow indicating that it is not as hot (also called the safety flame). So if you half opened the hole then the flame would be hot but not as hot as the blue flame, due to the air flow mixing with the gas inside.
