step 1:start step 2:input the values of a,b,c step 3:if(a>b&&a>c) max=a step 4:else if(b>c) max=b step 5:else max=c step 6:output:max step 7:stop
it is a step by step program written in simple English for our understanding
Yes, when using a step down transformer the amperage is affected.
You step down voltage from an AC generator with a transformer.You step down frequency from an AC generator with a motor/generator set, or with an inverter. This is not a common thing to do.
Usually refers to a transformer. A step up transformer increases the voltage and a step down decreases the voltage by an amount proportional to the ratio of the windings between Primary and Secondary. A 1:2 ratio is a step up and doubles the voltage. A 2:1 would be a step down and halve the voltage.
All of the strings are tuned down a half step, with the low E string tuned down a step and a half. It would be (from lowest to highest) C#, G#, C#, F#, A#, and D#.
C#/Db is a half step above C.
A B sharp is actually a C, and it's a half step up from B and a half step down from C sharp. So basically its between B natural and C sharp.
B flat. I picture it on the piano, one key is one semi-tone or half a tone. Two of these makes one whole tone, or one whole step. One half step down from C would be the note B, another half step would then go to B flat. That is one whole step.
An interval is the distance between two pitches. These intervals are measured in half-steps and whole steps. For example, a half-step is like C to Db. A whole step would be C to D. A major scale is made up of these steps as so: C MAJOR Whole step, Whole step, Half step, Whole step, Whole step, Whole step, Half step. C to D, D to E, E to F, F to G, G to A, A to B, B to C WWHWWWH You may have noticed that from E to F and from B to C it was a half step just as if it were from C to Db. This is because these pitches are simply a half step away from each other.
The interval from B to C is a minor second (m2) or a half step.
half a step down, otherwise known as open d# tune all the strings down half a step
That is commonly called a half step.
C Natural is a whole step above B flat. If you look at a piano, a half step above B Flat is B Natural, and one more half step above that is C Natural. So it's a whole step from B Flat to C Natural.
The formula used to construct any major scale is 2 whole steps, 1 half step, 3 whole steps, and 1 half step. To find a C Major Scale, begin on note C and use the formula. One whole step from C leads to D. Another whole step from D leads to E. Then, move up one half step to F. One whole step from F is G. From G, move another whole step to A. The last whole step leads to B. Take one last half step to C. The notes of the C Major Scale in order are C, D, E, F, G, A, B, C.
C Natural is a whole step above B flat. If you look at a piano, a half step above B Flat is B Natural, and one more half step above that is C Natural. So it's a whole step from B Flat to C Natural.
It lowers the note by one half-step/semitone.