= A lens cap is a cover to a lens on a camera or camcorder.=
? to protect the lens i assume.
to protect the lens
The purpose of a Canon lens cap is to provide protection against scratches for a Canon camera and camcorder lens. Most cameras come with their own lens caps.
The lens cap.
place the lens cap in place.
Lens Cap meaning she forgot to take off the cap to the lens before the picture.
To clean the inside headlight lens on a ford ranger just simply remove the cap and clean.
you need to remove the tail light lens. There is a large round plastic cap located behind the lens in the truck .Remove the cap and there is a black plastic nut that you can remove by hand, that will release the lens and you will be able to replace the bulbs.
Camcorders don't think. If the lens cap is off, and the camcorder is not functioning properly, look through the manual under troubleshooting. If that does not help, then its time to have it checked out by the dealer or manufacturer.
I always try to avoid doing this, however when need be I put the lens cap on the camera and record it once or twice with the cap on.
It could be that the lens cap is still on.
Pop the trunk, there are three plastic wing nuts that hold the lens to the body (one is hidden under the carpet which can be removed by two screws), remove the wing nuts, pull the lens away from the body. On the back side of the lens twist the grey cap firmly that holds the bad bulb and remove cap. Pull the bad build out replace with a new bulb.