It is a device inserted to a convinience outlet to conduct electric current. A flat cord is attached to it on one end and the other end is to a current consuming instrument or appliance... :)
I,m going to bypass the generator and plug into the house for my race car trailor. Once I pull the plug from the gewnerator I will have a four prong male need to plug into a for prong female then be able to plug into a house socket.
This is something that should not be done. If this was to be done you would be omitting the ground which in point can make it unsafe. I recommend changing the female end of the system and making it a 4 prong.
There are several parts to an extension cord. There is the "female" end where you would plug in the appliance, the cord, and then the "male" end which gets plugged into an outlet.
Can you change the plug? Yes. Should you change the plug? NO!!! The 20 Amp plug is just that a 20 amp plug. The plug you want to change to is a 15 amp plug. The ramifications are pretty easy to understand. The 20 amp load will overload the receptacle for sure, and likely will overload the branch wiring and circuit breaker if they were designed for 15 amps. This could cause at the least your home wiring to get brittle and eventually short out. It could also cause a circuit failure, leading up all the way up to a fire. My recommendation is to move the canopy to a 20 Amp plug or have a licensed electrician install the proper breaker, wiring and receptacle. See view discussion below.
The ground prong (usually of a male plug) is a metal tab or rod connected to the conductor which is to be grounded.
Well, if it has 2 male pins, then it is a EU (European) plug. If it has 3 male pins, it is a UK plug.
A female plug is a plug where there is a hole. To connect to a male cable, insert the male cable into the female one.
If you do have one, you will have a male plug to plug it into an outlet. If you can find no plug then you don't have one.
A microphone is a source that sends an output to its male plug. A loudspeaker is a load and receives an input at its female plug.
Dont make a male to male cord! The reason is you will have a energized male end when you plug into a socket. Call a electrican to help you with your project Dont make a male to male cord! The reason is you will have a energized male end when you plug into a socket. Call a electrican to help you with your project
A banana plug is a single-wire male component of a banana connector.
A current higher than what the plug is rated for will cause that type of condition.
An audio coupler is designed to attach to an audio connector and change it from male to female and vice-versa. Just like a converter allows you to plug in your connector to a different-size plug, a coupler allows you to plug in your connector to a same-shape plug: male to mail and female to female.
I,m going to bypass the generator and plug into the house for my race car trailor. Once I pull the plug from the gewnerator I will have a four prong male need to plug into a for prong female then be able to plug into a house socket.
That is the L-shaped female plug at the end of the HT (high tension) lead that fits onto the outer (male) end of a spark plug.
A microphone is a source that sends an output to its male plug. A loudspeaker is a load and receives an input at its female plug.
This is something that should not be done. If this was to be done you would be omitting the ground which in point can make it unsafe. I recommend changing the female end of the system and making it a 4 prong.