Mig (GMAW) has almost replaced Stick (SMAW) in industry. Small machines can weld thin materials and larger machines weld metals of unlimited thickness. Mig is easy to use and has less waste (no stubs) than stick. Flux core wire produces a slag covering but bare wire w/gas leaves a clean weld.
A MIG (Metal Inert Gas) welder is used to weld together metals that are non-ferrous (metals that do not contain Iron). A MIG welder can be used on metals that have a lower melting point than a traditional welder would be used for.
The wire feed welder is a MIG welder.
can weld aluminium with a mig or tig welder
A clarke mig welder is considered a top of the line welder and can be purchased at specialty welding stores or even at hardware stores like home depot or menards. They can also be bought online.
yes
the best way to get a good looking/ strong weld on aluminum is using a tig welder it is also possibles with a mig welder but for best results recommend a tig welder with HF
there is no such thing as a gasless mig welder because mig stands for metal inert gas. you must have tubular wire which has the flux in the wire. i would say you should get some s wire to do the job
Most common and main limitation of MIG welding is that MIG welder could not weld thicker metal. If you want to know details then visit this site.
Tig, mig , or If you are as good as me stick welding will all work
The most powerful MIG welder available for purchase is a 220V / 200AMP. Since these powerful MID welders can cost upward of $2000, hobbyist work would not require such power.
5 mm
place the metal clamp on a form of metal turn the mig welder on turn the gas on know were your welding flip your shield down and then give er
MIG Small machine like Lincoln SP 135 is nice.