It is a card that plugs into the PCI or ISA slot of the motherboard and outputs hex codes at certain stages in the boot sequence. Depending on where this number stops, you can identify the causes of motherboard boot problems. The hex codes themselves are generally specific to the manufacturer of the BIOS, but can easily be looked up online.
Debug Card is a powerful diagnostic tool for technicians and administrators to troubleshoot various problems in PC . To install a debug card - 1) Install the Debug Card in any available PCI or ISA expansion slot. 2) Power on the machine. it will show you the exact problem ....
Get a new motherboard or a new graphics card.
normally the motherboard have 1 slot for video card.
A graphics card can be a separate, add on, card but the functionality can also be built into the motherboard to save space.
Because Your Local Area Network Card is not supported by your motherboard or not secured is in place
Read the owner's manual for your motherboard.
LPX or mini LPX uses a riser card ( also called a bus riser or daughter card). LPX motherboard has the riser card near the center, whereas the NLX motherboard has the riser at the edge of the board.
Every PC has to have either graphics embedded into the motherboard or either a a dedicated graphics card that fits into an expansion slot on the motherboard. You can buy a motherboard without graphics, but you would need to supply a graphics card to go with it.
location on the motherboard into which a controller card for a peripheral device is stored
1st take the game card out of the DS, then press the following: L+R+A+LEFT, DOWN+B, SELECT+START. After that you get a whole lot of debug goobledegook!
On your computer's motherboard.
The NLX form factor has a riser card on the edge of the motherboard.