a paki
100Base-T network require usually cat5 maximum of cable length 100 meters to 380meters.
another name for an ethernet cable is a cat5 or cat5e cable
Yes, a Cat5 cable can be used to connect a CCTV DVR to a TV, but it typically requires additional equipment like a network video encoder or a compatible network-enabled DVR. The Cat5 cable can transmit video signals over a network, but the TV must support network streaming or have the appropriate inputs to receive the signal. For a direct connection, standard HDMI or RCA cables are more commonly used.
Plug the cat5 cable in or use the wireless mode--- magic you are networked.
With 2 or more computers and a hub, switch, or router. And some Cat5 cable with ends.
Today's standards use Cat5 cable. Cat6 is newest but more expensive and harder to install.
Cat5 cable
A Cat5 network router is a device that facilitates communication between devices on a local area network (LAN) using Cat5 Ethernet cables, which support data transmission speeds up to 100 Mbps. It connects multiple devices, such as computers and printers, to the internet and to each other, allowing for efficient data sharing. While the term "Cat5" specifically refers to the cabling standard, routers may support various cable types and speeds; however, Cat5 is often associated with older networking setups.
Yes you acn use a hub to connect your computers. Just connect a cat5 network cable from each of your computers to the hub. It doesn't matter which port you plug the cat5 cable into on the hub. they are all the same. Also, if you might be interested in making your own cat5 cables. I have added a link on how to do ths.
Star topology is like the network is done by easily adding another network and the most common cable is used unshielded twisted pair cable. For the star topology purpose, Cat5 and Cat6 cable is used because it is an unshielded and shielded twisted pair cable.
Cat5 is the standard.
Minimum 9. Lenght may vary.