It is a push button that has the capacity to be locked so as to render is inoperable when pushed. These types of button locks are used on start buttons as a safety measure in industrial applications.
push button
How do you start and stop a motor only using one push button?
It means that when the breaker is switched "ON" using the push button and simultaneously a fault occurs, the breaker will trip even if the push button is still being held in "ON" position.
You add an auxilliary normally open contact to the contactor. This contact will be closed any time the contactor is energized. Wire the contact in parallel with your start button. It works like this: When you push the start button, the contactor energizes, starting the motor (or whatever you are controlling). At the same time, it closes the aux. contact. You can now let go of the button, because the aux contact is holding the circuit energized for you. Of course, now the load will run forever, so you have to add another button to break the circuit, allowing the contactor to de-energize. The start button is normally open, closing when you push it. The stop button is normally closed, opening when you push it. Most starter contactors have auxilliary contact kits that you can buy just for this purpose.
A normally open contact is similar to a spring loaded switch, found in push buttons, and relays. For a push button, when you push the button, the button head has a piece of metal that makes contact between two external screws, where the wires are attached. For a relay, the concept is the same, but instead of pushing the button yourself, the relay would be turned on and off by an external electronic device.
On the opener there should be a button by where the thin wires attach. Push the button, probably a square one and it should flash. If you have a transmitter, push it and the button should flash. If there is a key pad for the door, push the button on the opener then put in a 4 digit number on the key pad and push Enter. That will be the new code.
There should be a button labelled numlock, push this and it will toggle number pad on and off.
You right click
Unlocks Emo Crys: Up (+Control Pad), Up (+Control Pad), Left (+Control Pad), Left (+Control Pad), Down (+Control Pad), Down (+Control Pad), Right (+Control Pad), Right Unlocks Jay Jay: L Button, R Button, A Button, Left (+Control Pad), Right (+Control Pad), Y Button, R Button, L Button Unlocks Lil' Rob: L Button, Left (+Control Pad), Y Button, R Button, Right (+Control Pad), A Button, Up (+Control Pad), X Button Unlocks Spitbal: Up (+Control Pad), Up (+Control Pad), Down (+Control Pad), Down (+Control Pad), L Button, R Button, L Button, R Button Unlocks Jack Knife: X Button, A Button, X Button, Y Button, Up (+Control Pad), Left (+Control Pad), Down (+Control Pad), Right (+Control Pad) From wwwgamefaqcom
You push the button you normally push to pick up a weapon. Walk next to the steps but be sure the button you push doesn't include moving the analog stick or the d-pad
to do your finiser on TNA IMPACT for the Wii all you have to do is push the action button( the down on the D-pad) what you have to do is lock in a hold(z+ swing remote) then press and hold the action button(down on the d-pad
because u puch the button
if u haven't yet erase the game data then go to connect to pokewalker from the main menu then you will see save then go for a stroll then instead of pushing the A button push down on the D-pad,the X button and the L button
Standing in front of the garage, looking in. On the left hand side of the opener , there should be a square button next to where the wall button wires are attached. Push this button and it should flash. Then push the button on the remote and the light should go out. It is now programed to accept the new transmitter. If you are installing a key pad, push the button on the operator and then you have 30 seconds to put in a 4 digit number in the keypad and then hit enter.
The 'control pad' is the + shaped directional button.
If you have the brown-ish guitar, it's not a d-pad it's more like a joystick. The button you push to turn on the guitar is on it. If you have the black guitar, it's right next to the power button. PS: This is the first question I've ever answered on Wikianswers.
you push the bark button push the bark button