how to changr pick up coil 88 vandura
Ignition coils are generally external while pick up coils are generally internal to distributor
Two Pick-Ups In One Did you know:A humbucking pick-up is a pick-up that has 2 single coil pick-ups put together.
Rotor Pick-up coil
In the distributor.
96 gmc does not have a pick up coil but the coil is monted to the intake removed by two bolts pick up is in the dis. removed by pulling the dis. then by taking a part
The pick up coil is located at the base of the distributor and plugs into the ignition module. The pick up coil's purpose is to sense or "pick up" the pulses of the distributor and tell the ignition module when to fire the spark plugs. The most critical part of the replacement of the pick up coil is to make certain you properly mark the orientation of the distributor to the engine block and the rotor to the distributor base. When you successfully make these markings, you will not need to check your timing when this job is finished.
could be.... coil ... coil wire or... pick up coil.. not working
To change the pick-up coil on a KX80, first, remove the stator cover by unscrewing the bolts and carefully taking off the cover. Disconnect the old pick-up coil from the wiring harness and remove it from the stator plate. Install the new pick-up coil by securing it in place and reconnecting the wires. Finally, reassemble the stator cover and ensure everything is tightened properly before testing the bike.
No spark.
Need more info than that to help you.
Inside the distributor.