Aport is an application specific or process specific software construct serving as a communications endpoint in a computer's host operating system.
Port Triggering opens a port when a PC on the network initiates communication through another port.
Ethernet port
Lan Card provides a port for a network cable to connect the pc to a network.. LAN : Local area network or Ethernet Card and Network Card
The port that you plug an Ethernet network cable into is commonly called an Ethernet port or RJ-45 port. This port is typically found on computers, routers, switches, and other network devices. It allows for wired network connections, facilitating data transmission over local area networks (LANs).
It's an Ethernet port used for network connections.
That would be a network printer.
A cloning port is a specialized endpoint on a switch that allows network administrators to replicate or copy network traffic from one port to another. This is often used for troubleshooting, network monitoring, or security analysis purposes. By using a cloning port, administrators can monitor and analyze data without disrupting the flow of traffic on the network.
LAN Port, Network Port or Ethernet Port
Port 80
In an RSTP-enabled network, the possible port roles for ports A, B, C, and D are Root Port, Designated Port, and Blocked Port. The Root Port is the port that provides the shortest path to the root bridge, while the Designated Port is the port on a network segment that has the lowest cost to the root bridge and is in the forwarding state. Any port that does not fulfill these roles may be placed in a Blocked state to prevent loops. The specific roles would depend on the network topology and the bridge IDs.
Yes. Port forwarding is typically done in the router. However, you cannot forward the same port to more than one computer on the network.
When STP (Spanning Tree Protocol) places a port in the blocked state, it effectively disables the port to prevent network loops. This means the port will not forward any traffic, ensuring that data packets do not circulate endlessly in the network. The blocked port listens for STP bridge protocol data units (BPDUs) to detect changes in the network topology and can transition to a forwarding state if necessary. This mechanism helps maintain a loop-free network environment.