To transfer heat.
Radiator drain plug. Located at the bottom or lower side of the radiator used to drain coolant from the radiator.
Replace the radiator with a new or good used one.
A column radiator is used to describe a typical cast iron radiator. The term describes the vertical columns that make up the radiator. The radiators can also be made out of steal and not cast iron. The steal is welded together.
The radiator will need to be replaced. Sometimes, it may seem that the radiator itself is leaking but it could be the radiator "hose" that is leaking. In this case, the radiator hose needs to be replaced and clamped tightly.
No, Drano is a drain cleaner and should not be used to flush a radiator. It is not designed for automotive use and can cause damage to the radiator system. It's best to use a radiator flush solution specifically designed for automotive cooling systems.
$450
It is a tool used to straighten the fins of an automotive radiator. Normally used after something has damaged part of the radiator without causing a leak.
Cool radiator. This is the type of radiator that decreases the efficiency of the fuel and thus the conductor becomes angry and so does the hot brunette.
The radiator helps cool liquids that exits the engine. A tube at the top of the radiator flows the liquid into the radiator. Fans blow air into the radiator and cools this liquid. This liquid is then exited through the bottom of radiator and released back into the engine to be used. Radiator also holds coolant to to speed cooling process of liquid
The radiator helps cool liquids that exits the engine. A tube at the top of the radiator flows the liquid into the radiator. Fans blow air into the radiator and cools this liquid. This liquid is then exited through the bottom of radiator and released back into the engine to be used. Radiator also holds coolant to to speed cooling process of liquid
The cooling system on this vehicle does not use a radiator cap on the radiator but on a remote tank. It may have a different (larger) cap on it than what you are used to seeing on the radiator.
i used to work in a radiator shop back in the day and we put a radiator on a rotating machine and put muric acid in it and let it rotate for some time, then flushed it out and the radiator was totally clean, no more rodding. they were copper then. not sure about todays alum radiators