A salt water generator, also known as a salt chlorinator, is a device that converts salt into chlorine to sanitize and disinfect pool or spa water. It works by passing an electrical current through salt water, which then produces chlorine gas that dissolves into the water. This eliminates the need for traditional chlorine chemicals to be added to the water on a regular basis.
Add salt to water to obtain salt water.
salt is not from salt water
Salt water and brackish water are different in terms how the amount of salt. You can say salt water is brackish, since brackish water and salt water both contain salt. However, salt water has more salt than brackish water, since brackish water is a mix between salt water and fresh water (so it has less salt).
Fresh and salt water are very different for one key reason, fresh water doesn't contain salt and salt water obviously does. There are different flora and fauna in fresh and salt water for this reason.
When the salt water evaporates it leaves the salt behind, so no salt water cannot be precipitation.
Yes, as the generator creates the sanitizer for the pool, just throwing salt in it won't do anything
Yes. The salt is run through a chlorinator that changes the salt to chlorine. It won't do it by itself so you have to buy the generator to do this.
no, and I think you mean "salt water chlorine generator" not "salt water pump"
NO
NO! the water can become aggressive.! Ken
They are two different things . The salt chlorine generator is seperate from the pool pump .
40k gallons
No, You have to have a salt/Chlorine generator or you'll just be swimming in a slime salt water body of water.
Although ordering the spa as a "salt water" hot tub when you buy it is easier, as there is some plumbing work required, you can retrofit either a bromine salt generator or chlorine salt generator and create your own "salt water spa".There is a misnomer about salt water hot tubs in that you still have to create the chemical chlorine or bromine in order to sanitize the water. Only with a salt generator this process happens automatically, but you must establish either a bromine salt reserve or a chlorine salt reserve depending on the system you are using.You will save the trip to the store for chlorine or bromine, but you still need to add the salt when you refill the spa or when you top up the water.To convert, the bromine salt cell is plumbed into the water line and the control unit is mounted to the spa. A hot tub tech can do this for you. Sometimes you may save by already having the salt generator and just having someone hook it up and add it to the plumbing.There is no switching. But you do have to install a chlorine generator. The generator makes the chlorine from the salt you add. But why go through all the hassles and expense?A better bet would be to use Bromine, it was developed for use in hot tubs. Besides at high temps. chlorine will vent off in a gas form and probably run you off.
Salt is not a filter, it is added to pool water to allow a chlorine generator to operate.
There is a common misconception that salt water swimming pools are chlorine free. Salt used in pools is "sodium chloride" When the salt water goes thru the generator the chlorine is released.
Do you mean to say that you have a fresh water pool with a Chlorine Generator which uses salt? Or do you in fact have a salt water pool? bob...