Want this question answered?
(1) the higher the twist, the higher the throughput (2) The higher the twist, the the lower the crosstalk
take fencing pliyers and twist the wire.
First twist together the wires to be joined. For larger wire use lineman's pliers to apply twist. Make the twist clockwise. Then twist on the wirenut clockwise on the wires. Wirenuts are rated as to how many wires of a certain size they can hold but in general twist by hand until you can twist no more and then about 1/2 twist with pliers. If the wirenut does not get tight it is too big or internal metal portion could be clogged in some way.
pull and twist on metal sleeve surrounding plug wire. Nope.. try to twist the boot to break the grasp.
Theyre like pliers, just with a sharp edge and they can be slid along the coating of a wire to strip it
you have to wire it differently or at least stop it with your hand and twist it
Twist and pull with pliers.
To make a peace sign necklace, start with a circle of wire. Divide the circle in half with another wire and twist the ends top to bottom in the circle, then twist another equal sized piece in the center of the divider wire. Secure the ends of the second wire to the circle about 1/3rd from the dividing wire bottom. Add a thong to the piece, and you have a peace sign necklace
red wire, blue wire, green wire and the black wire.
Dont connect the common wire.
The amps that a four gauge wire will handle will depend with the thickness of the wire. If the wire is thin, the four gauge will handle 95 amps.
To help prevent cross-talk between the pairs.