Best Answer:Sash Clamp is used to clamp together when it is glued.
A bar clamp is used for making clamps
use for clamp the iron stand gently
these are 2 types of pinch clamps (where you pinch the clamp and when you let go it clamps
It is a multimeter with a clamp on facility to measure current using it as a current transformer.
Here is something you can try. Go to the hardware store and get a conduit mounting clamp that fits your shaft size, then get an eye bolt, You will need two nuts for the eye bolt. mount the clamp on the shaft, put one nut on the eye bolt and insert it in to the other hole, putting the secong nut on the bottom, tighten the two nuts, clip on your strap you should be good to go.
Just wrap one end around your wrist and then clamp the other end to any metal part of the laptop. Same as a desktop just a little tighter.
There is only 1 syllable in "strap."
There are many different types of ankle strap sandals, like the evening ankle strap, the rhinestone ankle strap, flat ankle strap, Gucci ankle strap, and many more.
Kindergarten- wheeler back packs 1st- 2 strap 2nd-2 strap 3rd-2 strap 4th-2 strap 5th-2 strap 6th- Book bag or 1 strap
Straps is the plural of strap
First, Determine what type of bike trailer hitch system you have. There are quick-release skewers and fixed-nut attachments. The quick-release skewer is just a squeeze clamp and strap that attaches around the bike seat post. The fixed-nut attachment is a horizontal hole through the trailer hitch that will bolt to the rear bike wheel. Second, Unscrew the nut holding on the rear tire. This is necessary for the fixed-nut attachment bike trailer hitches. Third, Slide the fixed-nut attachment trailer hitch over the rear wheel bolt protruding through the bike frame. Screw the nut back on tightly. Fourth, Wrap the strap around the bike seat post under the bike seat. This is necessary for the quick-release skewer bike trailer hitches. Lastly, Squeeze the clamp on the quick-release skewer. Feed the strap back through the quick-release skewer on the bike trailer. Release the clamp on the quick-release skewer. Pull the strap tight.
the hobble strap is located on the stirrup it is the strap that keeps it together at the bottom.....
A monk strap is the nonfunctional strap at the ankle of a man's shoe overlaying the throat.
Best Answer:Sash Clamp is used to clamp together when it is glued.
It is possible to fit the guitar strap to it if it has a strap peg. The strap may or may not be too long, however. If your guitar or ukelale does not have a top strap peg, like me, then you can tie a long string or strap behind the strings, above the nut. I reccomend using a wider strap to prevent it from cutting into your shoulder.
thin strap. definitely thin strap.