is when you re-cut the threads in a bore using a die tool that is struck and then turned to make the threads
The extration of ground water, commonly via a bore hole drilled into an aquifer is called Tapping groundwater. It is a process in which a pipe and a pump is used to pull water out of the ground.
A woodpecker, when trying to get bugs in a tree, uses its sharp beak to "drill" a hole in the tree, making loud tapping noises, hence the name "woodpecker"
It is a semi solid mass consisting of mixture of chemical and minerals which is fixed to the tap hole of a blast furnace.it is opened during tapping of molten iron
A self-tapping screw can be used to join two pieces of plastic or metal with simple holes drilled into them. A "normal" screw requires one of the holes to be "tapped" - a spiral has to be cut into one of the holes to accept the screw. Tapping holes is something of a game of skill; the tapping tools use very hard, brittle steel and it's easy to break a tool in the hole.
You must have heard about tapping of phone . Tapping data is same as tapping a phone , all the data entered into the database will be visible during tapping.
It's done a few different ways, but the drawing will usually specify the hole size before tapping, the diameter and thread per inch of the tap, and the class of fit such as 1b, 2b, or 3b.
A self-tapping screw can be used to join two pieces of plastic or metal with simple holes drilled into them. A "normal" screw requires one of the holes to be "tapped" - a spiral has to be cut into one of the holes to accept the screw. Tapping holes is something of a game of skill; the tapping tools use very hard, brittle steel and it's easy to break a tool in the hole.
A self-tapping screw can be used to join two pieces of plastic or metal with simple holes drilled into them. A "normal" screw requires one of the holes to be "tapped" - a spiral has to be cut into one of the holes to accept the screw. Tapping holes is something of a game of skill; the tapping tools use very hard, brittle steel and it's easy to break a tool in the hole.
In-die tapping is the process of tapping stamped parts in a progressive die while in a punch press. In-die tapping eliminates the need for a secondary tapping operation of stamped parts.
yes it is, it is annoying
Just go to a store that has screws and ask an assistant for a self tapping screw if you are drilling a new hole. And then go home and drill it in with an electric screwdriver.
Amanda Tapping is Canadian.