its a cotton gin
The upper thread guide on a sewing machine is the markings on a sewing machine which show you how to thread the machine. It's usually indicated with arrows, dashes, and numbers, giving you step by step guides to thread the sewing machine properly.
The lower bobbin carries the lower thread and the upper bobbin carries the upper thread to use when the sewing machine is working (NOT SOWING Machine)!!! The needle carries the upper thread - NOT the lower thread - as the question asked!!
to use a knitting machine for the girls only one you have to thread it on one needle and then not thread it on to the next then thread it on again then don't etc
The thread guide keeps the thread going straight in one direction.
The thread guide keeps the thread going straight in one direction.
The take up lever is used in threading the sewing machine and to keep the thread tension at the proper level. If the take up lever is threaded improperly, the thread will knot up and jam in the machine.
I am having the same problem just purchased a S457 machine instrustion are very poor machine will not sew ! help
To thread a Sun hand sewing machine, start by placing the spool of thread on the spool pin and guiding the thread through the thread guide. Next, pull the thread down through the tension discs and then up through the take-up lever. Finally, thread the needle from front to back, ensuring the thread passes through the needle eye properly. Once threaded, pull the loose end of the thread to ensure it's secure in the machine.
Its not special thread,but it does recommend the certain threading for this machine for the best sewing.
A thread rolling machine is used to cut external screw threads on round metal bars to take the internal screw thread of a nut (as in a nut and bolt).
To thread an imperial machine, first, ensure that the machine is powered off and the needle is in its highest position. Begin by placing the spool of thread on the spool pin and guiding the thread through the tension discs, ensuring it sits properly. Next, thread the take-up lever and follow the threading path down to the needle, making sure to thread it from front to back. Finally, pull a few inches of thread through the needle and check that everything is secure before turning the machine on.
It regulates the thightness or lossness of the thread.