It is a type of plug/receptacle. Once you insert the plug, you can twist the plug to lock it in the receptacle.
If you are referring to the 25KW Power Distribution Panel used by the military, NSN: 6110-01-244-3209, there are four 120VAC, 20A circuit breakers and four corresponding twist lock receptacles.
With a chain and lock of course like we do on fire suppression systems to prevent tampering
You can open a key lock on a door knob, or you can open a deadbolt lock on the door itself.
Lock Range of a PLL is the range of frequencies centered at free running frequency of VCO, around which the PLL can remain in locked state. Capture Range of a PLL is the range of frequencies centered at free running frequency of VCO, around which the PLL can acquire lock-in from an unlocked state. The relation is Capture Range<=Lock Range
One old trick to solder two wires is to twist them together and twist some solder round them as well, wrap them in foil and apply a lighted match.
Get naked and all will be well
It varies form lock to lock. Some you twist a dial, some you punch in the numbers.
you get keys put it in the lock and twist
With the lock mechanism missing, look into the hole where the lock should be. Take a flat screw driver and insert it into the slot near the back of the lock hole and twist.
By the use of twist-locks and stacking cones.
Check out Related Links below
push in slightly and turn to the left (counter clockwise) and remove
You just find the key and twist it in the lock and push the key into the lock until the lock breaks. if the key doesn't work use something stronger and do the same thing!
lift hood look at back of light threr is a twist lock simply twist to remove replace bulb and reinstall
open the hood look towards the front of the car where the head lights are. their should be a lock that you have to twist and then pull out the old one and put in the new light and don't touch the glass or it will blow once in twist the lock and you are done
ringlet, lock, twist, spiral, coil, kink, whorl, rimp, wave, perm, bend
1. First stick the bobby pin on the door lock. 2.Then twist the bobby pin.