A you sure you don't want to post this in Physical Therapy???
UNIVERSAL TESTING MACHINE IS COMMONLY KNOWN AS UTM.IT IS USED TO PERFORM A LARGE NO. OF TESTING OPERATIONS LIKE TENSION TEST, COMPRESSION TEST,E.T.C.
Utm works on force and elongation/deformation principle.
parts of utm:basebottom cross headcolumnmovable cross headtop spacerload cellactuator
Normally, universal testing machines have a moveable struture which can vertically move up and down to realize both tensional and compressional tests. Tensional tests include tensile, tear and peel tests Compressional tests include compressive, shearing, bending and flexural tests Universal testing machines can be classified into two categories daccording to their driving methods: servo-hydraulic drive and electromechanical drive. Servo-hydraulic: it has a tensile structure mounted on a oil cylinder which is used to drive the tensile structure up and down, and the oil feeding rate to oil cylinder is controlled by a servo valve. such as HUALONG servo-hydraulic universal testing machine Electromechanical: it has two screws and a moveable crossbeam, the crossbeam could move up and down to achive tensile and compressional tests, a servo motor which is contrlled by a servo drive to drive the crossbeam up and down. such as HUALONG electromechnical universal testing machine
as proper centering provides the uniform distribution of the load acting upon that particular sample, it gives u the perfect result
The Compression Testing Machine incorporates design features to enables high accuracy testing with economy, speed and versatility.
Tensile testing machine, Brick strength testing machine, Computerized compression testing machine are the instruments used. Compressive strength of burnt clay bricks is determined by compressive test.
Yes
"A materials testing machine measures constant load, constant load rate and constant displacement rate. " A materials testing machine can come in different forms. There is a materials test reactor located at the Idaho National Laboratory.
A Tensile testing machine also called as tension testing is used as a fundamental material in science in which a sample or specimen is subjected to a certain amount of tension until its failure. This is commonly used in quality control testing.
Bending or flexural tests are the most widely used methods for assessing the fatigue resistance of asphaltic materials. Four point bending is included in both CEN and AASHTO specifications. The specimen is a prismatic beam, which is subjected to sinusoidal loading in the controlled strain mode. In Europe the principal alternative is two-point bending using trapezoidal specimens, a test which was developed at LCPC in France. Cooper Technology manufactures several machines for asphalt fatigue testing like Servo-Pneumatic Universal Testing Machine, Gyratory Compactor, Servo-Hydraulic Universal Testing Machine, Stand Alone Four Point Bending Machine, European Standard Roller Compactors - Steel Roller, European Large Roller Compactor.
yes