Immediate addressing mode is when one of the operands is "immediately" located after the opcode. It is more correct to say that the operand is part of the instruction.
The operand addressing modes of the 8086/8088 are ...ImmediateRegisterDirectIndirectWithin the Indirect category there is ...BaseIndexBase + IndexBase + DisplacementIndex + DisplacementBase + Index + Displacement
there are five addressing modes in 8086 they are : 1->direct addressing 2->Indirect addressing 3->index addressing 4->immediate addressing 5->register addressing
Immediate addressing mode is when one of the operands is "immediately" located after the opcode. It is more correct to say that the operand is part of the instruction.
indexed addressing
Addressing modes of 8051 are 1.Immediate Addressing Mode 2.Register Addressing Mode 3.Register Indirect Addressing Mode 4.Direct Addressing Mode 5.Implied Addressing Mode and 6.Relative Addressing Mode
minimum mode and maximum mode
The MN/MX- ping on the 8086 is pin 33.
literal and absolute direct are the registers
Data can be accessed from memory by using the addressing modes, 8085 has 5 addressing modes namely,1. Immediate addressing mode 2. register addressing mode 3. direct addressing mode 4. indirect addressing mode 5. implied addressing mode
i.e.-->mov ax,2000h (in 8086)
Its 16bit microprocessor,and-> the 8086 has a 16bit databus 20bit address bus-> the intel 8086,is designed to operate in two modes namely(1) minimum mode(2) maximum mode
Its MRDC (memory read control) it is a maximum mode pin in 8086 microprocessor