Want this question answered?
you need a step up transformer
Yes by using a 3-phase transformer. The size depends on how much power has to be converted.
No, in North America most homes are wired to a single phase transformer. That transformer is connected to a three phase power grid. Some of the newer apartment buildings and condominium complexes have three phase systems in them. Their voltages are 120/208 as compared to a homes single phase connection of 120/240 volts.AnswerSome European countries, such as here in Cyprus, have three-phase residential supplies as standard for some reason -can't quite figure out why it should be necessary, though!
200 and 100
Yes, with an auto transformer. It is a transformer with multiple taps on the winding. Connect the 208 volts across the common tap and 208 volt tap. Then connect the load across the common tap and the 240 volt tap.208 VAC usually comes from one floating side of a Delta 3 phase transformer.240 VAC usually comes from a grounded center tapped transformer.Using an autotransformer would be very hazardous and violate code. Probably tripping the 208 VAC breakers.The only way to do it correctly would be with a transformer with a 208 VAC floating primary and a 240 VAC grounded center tapped secondary.
The transformer will act as a step down transformer in the ratio of 240 to 208. This will reduce the 208 input to 180.
45000 / 208 /sqrt(3) = 125A per phase this is probably called a boiler unless it has a 2000Gallon tank
you need a step up transformer
For a single phase 3 HP motor at 208 volts the amperage is 18.7 amps. For a three phase 3 HP motor at 208 volts the amperage is 10.5 amps. This figure is derived at by taking the full load amps at 230 volts and adding 10%. As the voltage goes down the amperage goes up. For 200 volt motors 15% is added to the FLA of a 230 volt motor.
Yes by using a 3-phase transformer. The size depends on how much power has to be converted.
You can buy a converter. Here is one example of many available on the web.Phase-A-Matic PAM-300HD Phase Converter, Static, 1-3 HPPhase Converter, Static, Input Voltage 208-242, Output Voltage 208-242, Input Phase AC 1, Output Phase AC 3, Input (Amps) 15, Output Amps 9.6 ...
Usually with a voltage of 600 volts the motor will be three phase. To use a transformer with that motor you will need a three phase 240 volt service. These days utility companies are moving away from three phase 240 and substituting it with 120/208. The 208 three phase service has the added bonus that 120 volts can be obtained from the star point (grounded neutral).
The voltage 208 is a three phase voltage. Single phase is classed as the voltage obtained from any two legs of the three phase voltage system. The voltage between L1 to L2 = 208. L2 to L3 = 208 volts and L3 to L1 = 208 volts. To measure the load of the 208 volt device just clamp an amp meter around one of the legs coming from the load. This will give you the amperage that the load draws.
See Discussion Page
No, in North America most homes are wired to a single phase transformer. That transformer is connected to a three phase power grid. Some of the newer apartment buildings and condominium complexes have three phase systems in them. Their voltages are 120/208 as compared to a homes single phase connection of 120/240 volts.AnswerSome European countries, such as here in Cyprus, have three-phase residential supplies as standard for some reason -can't quite figure out why it should be necessary, though!
You need to mention the Load connected to find the current.
200 and 100