To connect secondary storage devices and to save the data permanently even while computer is turned off.
The data cable used by the normal IDE CD-ROM drive is called the USB cable. USB stands for universal serial bus.
80 conductor IDE cable; 40 conductor IDE cable
ide data cable or sata cable
Under parallel ata, two types of ribbon cable are used. The 80-conductor ide cable has 40 pins and 80 wires Forty wires are used for communication and data, and an additional 40 ground wires reduce crosstalk on the cable. An older 40-conducror cable has 40 wires and 40 pins. the two types of cables are PATA and IDE cables which come in a 80-conductor IDE cable and a 40-conductor cable
There are two, an IDE Cable which is an "older style" that is gradually being replaced by the SATA Cable.
The red stripe on an IDE cable indicates the "pin 1" side of the connector. This marking helps users correctly align the cable when connecting it to both the motherboard and the hard drive or optical drive, ensuring proper data transfer and functionality. Incorrectly connecting the cable can lead to device malfunction or data loss.
AnswerA standard floppy drive cable in a computer has 34 pins.
integrated drive electronics is the Full form of the IDE cable.
2 drives per ide cable
The correct answer is....80-conductor IDE ribbon cable.
An IDE connector is used to connect a CD-ROM drive or hard drive to a motherboard, with a long and flat ribbon cable.
40