Uplink is from MS to BS
Downlink is from BS to MS
P.S: BS=Base Station, MS=Mobile Station e.g cell phone
Hi, For every GSM band there are Uplink and downlink frequencies. Example: GSM 900 TX: 880 MHz to 915 MHz is an uplink frequency range GSM 900 RX: 925 MHz to 960 MHz is a downlink frequency range Aloha, Maverick
As the frequency increase its penetration power decreases.The signal travels a lesser distance.Hence for a perticular area more no of towers need to be erected in 1800/1900 than in 900MHZ for full coverage...Hence vodafone( 1800MHZ) has more towers per unit area than Idea Cellular ( 1800+900) ..... Band of 900 is from 890-915( uplink) 935-960Mhz( downlink).... Band of 1800 is from 1710-1785(uplink) and 1805-1880MHZ(Downlink).... Same property is followed here.....The uplink is lower ( MOBILE -BTS) than the downlink frequency (BTS-MOBILE)...so that this may help the uplink signal to travel futher without consuming much power...BTS due to its increased power ,has higher frequency to tavel the same distance....
The uplink is the transmitter than sends the data up to the satellite. This can take the form of a dish or a highly directional antenna. You typically see these directional antennas mounted on telescoping poles mounted on the top of TV station news vans.
Rx level sub is the downlink level received when DTX (discontinous reception) is enabled. It is difference from Rx level full is that in full values are calculated when all the burst includin silent burst are considered but in sub values silent burst are ignored
Sorry- we need a LOT more information to give you a SAFE and correct answer! It will depend on the voltage of the generator that you are connecting. You REALLY need to ask this question of an electrician who is looking at YOUR generator and YOUR mobile home.
Uplink and downlink are frequencies Communication from earth station to satellite in uplink and communication from satellite to earth station is downlink Always uplink freq.>downlink freq.
uplink frequency-1710-1785MHz downlink frequency-1805-1880
In the CDMA technology It is either between your Handset and the Mobile Station. The dedicated frequency are allocated for u sending your data to the mobile station (Uplink freuency) and a dedicated frequency is reserved for you to receive your data from the mobile station (Downlink frequency)
Uplink --> 890 MHz - 915 MHz Downlink --> 935 MHz - 960 MHz
Uplink frequency is a frequency that goes from the ground to the satellite. Downlink frequency goes from the satellite to the ground.
This is actually the EGSM uplink band. It carries signals "up" from the mobile station to the base station. EGSM downlink is from 925MHz to 960MHz and carries signals from the base station "down" to the mobile station.
Worldwide downlink for voice - 145.80Worldwide packet uplink/downlink - 145.825Region 1 voice uplink - 145.20Region 2 and 3 voice uplink - 144.49Worldwide uplink for cross band voice repeater - 437.80Worldwide SSTV downlink - 145.800For more information, visit the NASA ISS Amateur Radio page at http://spaceflight.nasa.gov/station/reference/radio/
To avoid interference
The downlink is greater than the uplink on most internet connects due to overall demand for bandwidth. Downloading takes up a majority of internet usage and connections are optimized for it.
Hi, For every GSM band there are Uplink and downlink frequencies. Example: GSM 900 TX: 880 MHz to 915 MHz is an uplink frequency range GSM 900 RX: 925 MHz to 960 MHz is a downlink frequency range Aloha, Maverick
Duplex distance/spacing is the distance between the uplink and downlink frequencies
hokjkljkljlkjljl