An Uplink Port is a port on a connectivity device, such as a hub or switch, used to connect it to another connectivity device.
If you connecting a hub to another device then the cable must be placed in the uplink port, or a port that can switch between a client port and an uplink port.
The uplink is a crossover port which allows a connection to another hub, thus extending the number of clients you can connect on the network.
The "uplink" port. If it doesn't have one, you will have to use a crossover cable.
you will need a crossover cable to do it. Just plug it in Gaurav Phade ------------------------------------------------------------------------------------------- You will need a crossover cable to connect hubs that have no uplink ports. However if the hubs have uplink ports you can get away with using a normal CAT5 ethernet cable. Some of the larger TP-Link hubs are usually designed so that every port on the hub can act as an uplink port! Regards Phillip Hurrell Cert IT & Comp (Open)
Uplink connections are typically used to connect the switch to a higher level switch, that is more powerful and closer to the backbone.On basic switch models, the regular ports are MDIX ports, meant to connect directly to a PC. The Uplink port is then an MDI port, which can connect (with a straight cable) to an MDIX port on a different switch. Often the highest numbered port (8, 16, or 24 for instance) has one MDIX port in the regular set and an MDI uplink next to it, but you can only use one of these two.You can use a crossover cable to connect MDIX to MDIX or MDI to MDI port.On more modern switches, ports are often MDI/MDIX autosensing and this reason for existence of uplink ports has passed (all Gigabit Ethernet has this, and many 100 Mbit Ethernet).In the mean time, however, switch models have come into being which have faster speed uplink ports. For instance, 10 Mbit switches with 1 or 2 100 Mbit ports to connect to the core network, or these days 100 Mbit switches with a few Gigabit ports.
Uplink and downlink are frequencies Communication from earth station to satellite in uplink and communication from satellite to earth station is downlink Always uplink freq.>downlink freq.
All you have to do is run a CAT-5 cable from one of the ports on your wirless router to the Uplink on your HUB....also keep in mind that when you plug something into the uplink port sometimes there is another port that you MUST LEAVE OPEN in order for the hub to work properly....to find out if this is the case look up the router on the manufacturer's website....and if you don't know what model it is or you're having trouble finding out the manufacturer usually you can find a sticker on the hub that has a combination of letters and/or numbers....take one of them at a time and google them....usually at least one of the numbers will let you know what company makes it and you can go from there
GSM 900: Uplink frequency: 890 - 915 MHz GSM 1800 : Uplink frequency: 1710 - 1785 MHz GSM 1900: Uplink frequency: 1850 - 1910 MHz
Uplink translates also to Upload - where you send data to another destination.
In the case of ethernet, you need a "crossover" ethernet cable connected between two regular ports or a regular ethernet cable connected to an "uplink port" on one switch and a regular port on the other. Uplink ports are sometimes called "MDI" ports. Both types of cable are available at most computer and office supply stores.
uplink frequency-1710-1785MHz downlink frequency-1805-1880
Uplink frequency is a frequency that goes from the ground to the satellite. Downlink frequency goes from the satellite to the ground.