It's a special paint applied to the hull of a boat, that surpresses the growth of organisms that would otherwise attach themselves to the hull surface.
yes as long as it is not aluminum and you use a hard antifouling paint.
An antifouling is a substance which prevents or counteracts the buildup of barnacles and other deposits on undersea surfaces such as those of boats.
Leigh T. Johnson has written: 'Making dollars and sense of nontoxic antifouling strategies for boats' -- subject(s): Antifouling Paint, Boats and boating, Environmental aspects, Environmental aspects of Boats and boating, Paint, Antifouling
Ofcourse! Most motor yachts are aluminum construction ,they would not go very far without antifouling coatings . Look for a high quality non copper based coating such as Pettit Ultima ECO. Also available is vivid ,I believe that is Pettit too. Doesn't hurt and you should prep the hull with barrier coat and primers.
Painting your boat is hard work, so you don't want to have to do it more than you have to because the paint is chipping. If you apply an epoxy barrier coat before applying antifouling paint this will ensure very few chips appear.
It was fitted on the hull. This is because copper is an antifouling material so marine organisms have great difficulty attaching. Without marine organisms (fouling) there is less resistance and the boat can go much faster.
24 hours
Yes, several brands have their own products but they all generally provide a controlled release of antifouling biocide at the paint surface, and will not lose its effectiveness when the boat is hauled out of the water for extended periods of time. So these paints are good for in and out of the water. Yes, boat paint is a special formulation that resists deterioration due to water and saline conditions. Boat paint is extremely expensive to purchase and have applied, and it is extremely toxic.
You should use a barrier paint. The antifouling should be either physically keyed or pressure washed to remove any loose paint or indeed any dirt. Different types of antifouling paint can react with each other
Richard Braithwaite has written: 'Fouling macroalgae and the efficacy of toxic antifouling paints and biocides'
Usually you would use either a lambswool or medium pile mohair roller. Foam rollers are only for Topcoats generally, or maybe the very thin film racing antifouling such as VC17m or VC Offshore by International. Worth having a couple of types of roller with you, and see which works the best accoring to the smoothness or roughness of your hull.
The Boat