In physics:
Axial Stress: A tension or compression stress created in a structural member by the application of a lengthwise axial load.
Definition Copyright ©1989 CRC Press LLC. All rights reserved.
Examples of tensile axial stress include a chain carrying a load and tension cables on a bridge. Examples of compressive axial stress include decorative columns in architecture and the steel structure of a high rise building.
That would be force applied to the lengthwise centerline of an object.
(pie*d2/4)*stress
Just like axial stress, shear stress is force divided by area. The area is the surface the force acts over. For example, imagine two wood blocks that are nailed together. If you apply a force to the top block orthogonal to the longitudinal axis of the nail and the same force in the opposite direction to the bottom block, the shear stress (𝝉) in the nail is 𝝉 = F/A or F/(πr2) where r is the radius of the nail.
Shear force is a load (pounds, or newtons) in plane of the object which produces shear stress ( pounds per sq inch, or Pascals). Shear force is related to shear stress as STRESS = FORCE/AREA
Centrifugal force of the fan results in an increase in static force. The blades of the axial flow fans force air to move parallel to them.
The maximum stress induced in a body due to suddenly applied load is twice the stress induced when the same load is applied gradually
Axial Stress: A tension or compression stress created in a structural member by the application of a lengthwise axial load.Definition Copyright ©1989 CRC Press LLC. All rights reserved.Examples of tensile axial stress include a chain carrying a load and tension cables on a bridge. Examples of compressive axial stress include decorative columns in architecture and the steel structure of a high rise building.Read more: What_is_axial_stressLongitudinal Stress: In continum mechanics, stress is a measure of the average force per unit area of a surface within a deformable body on which internal forces
Axial Thrust is a force that is generated in an axial direction which is by definition along the shaft
Axial Force is the y direction. Shear Force is the x direction. Axial force is either in compression or tension, hence compressive and tensile. Shear force is like a splice it cuts right through the object.
For calculating the collapse pressure of a pipe, you first need to calculate the Hoop stress, which is given by :- Stress = Circumferencial Force/(radial thickness*axial length) If the stress crosses this value the pipe would collapse.
2.1.2. Compressive StressIf the bar is subjected to axial compression instead of axial tension, the stress developed at x-x is specifically called compressive stress pc.pc =R/A= P/A.Under compressive stress the bar suffers shortening.
We knew from Hook's law- "stress is proportional to strain." So, stress = k * strain [here, k is a constant] or, stress/strain= k Now, if the stress and strain occurs due to axial force then k is known as modulus of elasticity and it is denoted by E. if the stress and strain occurs due to shear force then k is known as modulus of rigidity and it is denoted by G.
(pie*d2/4)*stress
Torque=.2*F*Bolt Maj. Dim. F=axial force
Just like axial stress, shear stress is force divided by area. The area is the surface the force acts over. For example, imagine two wood blocks that are nailed together. If you apply a force to the top block orthogonal to the longitudinal axis of the nail and the same force in the opposite direction to the bottom block, the shear stress (𝝉) in the nail is 𝝉 = F/A or F/(πr2) where r is the radius of the nail.
Stress is a force acting on certain area. Stress equals force divided by area.
The normal force acting on the contacting surfaces in case of cone clutches is more than axial force ,as compared to in single plate clutch in which the normal force acting on contacting surfaces is equal to the axial force.
halfed