0
It's a small hammer for use in upholstery . One head is flat and round and the othe is hemi-spherical.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What is ball pein hammer used for?
for hammering purposes and such
What is the special tool to remove front bearings on a 98 Honda civic?
They are pressed into steering knuckle. Remove steering knuckle from car, then you can put rounded end of ball pein hammer (make sure ball pein hammer end is big enough) into the opening where axle goes and hit it out by striking flat end of ball pein hammer with small sledge hammer. Ensure steering knuckle is solidly secured before striking with hammer.
What is the another word for blacksmith?
There doesn't seem to be real name for a blacksmith's hammer. (At least I have not found any specific names for it....) As a blacksmith, one of the most common hammers I use is called a cross pein. The other is a ball pein. Some companies will call a cross pein hammer a blacksmith hammer.
What do you call a blacksmith's iron block?
There doesn't seem to be real name for a blacksmith's hammer. (At least I have not found any specific names for it....) As a blacksmith, one of the most common hammers I use is called a cross pein. The other is a ball pein. Some companies will call a cross pein hammer a blacksmith hammer.
What is the functions of ball peen hammer?
A ball-peen (also spelled pein) hammer, also known as a machinist's hammer, is a type of peening hammer used in metalworking. It is distinguished from a cross-peen hammer, point-peen hammer or chisel-peen hammer by having one hemispherical head and one flat head. Though the process of peening has become rarer in metal fabrication, the ball-peen hammer remains useful for many tasks, such as striking punches and chisels.A ball peen hammer is for shaping metal sheet.
How do you take off a stripped tire stud on a 1997 subburban?
the stud is pressed into the hub using an impact hammer or a large ball pein hammer strike the stud until it pops out the inside of the hub
What is the parts of cross pein hammer?
The shaft, usually made of hickory, and the steel head. The cross pein is for nailing tacks in.
What do you use a cross pein hammer for?
a hammer that is used in woodworks to bang something together or something like thatANS 2 - The 'cross peen', or 'Warrington' hammer has a narrow flat head opposite the round flat head . This is specifically for striking tacks and similar fasteners.
How do you pull the flywheel off a 22HP Briggs and Stratton?
The easiest way without a puller is to loosen the nut, take a large ball pein hammer and place it ball end down on the tip of the carnk (should be a drilled place there) and take a heavy (2 lb. or better) and strike the flat face on the upper side of the ball pein with it. One to three blows will loosen it. Do NOT strike the flywheel, it will break the magnets toose. A prybar under the edge only is allowed.
What is the function of the straight pein hammer?
In furniture making and upholstering for hammering in small nails and brads in awkward places.
What is ball peen hammer?
A ball-peen hammer is a hammer with a flat head and an opposite, rounded - peening - head.
Ball been hammer is used for what?
Ball been hammer is used for what
