0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the peak load of a power supply?
A: A power supply when designed it will have some nominal criteria and also some maximum output power available which reflect to the peak load that it can stand without burning up
Information about load shadding?
I think it has to do with the power being shut down to compensate the high demand during the peak time.
What is the difference between rms value and average value of AC?
rms value of ac power = dc power in reference to heat production in pure resistive load So ac power of some rms value will produce the same heat in resistive load as dc power will of same value
What is the relationship betweenth the power factor and the load?
No Load factor is average power consumption rate divided by peak power consumption rate over a period of time. Power companies like customers who have very steady consumption rates ......Load factors approaching 1 Power factor is true power / apparent power (kW/kV.A) and is a measure of how efficiently a customer's load consumes power. Certain types of electrical loads consume power more efficiently ( resistive element heating ) and they have a Power factor approaching 1. Other types of load such as old inductions motor are quite wasteful consumers of power and the utility has to provide more current ( amperage ) for the load to convert to real power
Explain quantitatively why the maximum power transfer curve is not symmetrical about the point where the source resistance equals load resistance?
when we look at the curve ,, we can see that before the peak point curve has greater slope as compared to the slope after the peak point .. the reason is PL is given as I^2RL ,,, current is a squared term here . before peak point current is greater so overall change in power is much greater but after peak point RL is greater and current is less now the load resistance is not a squared term... so slope will be less. therefore the curve is not symetrical
A generating station is to supply six regions of load whose peak loads are 15000kw ,8000kw?
To determine how much power is needed to fulfill each region's requirement, we first need to know the total peak load of all six regions combined. Total peak load = 15000 kW + 8000 kW + (four more regions' peak loads) Assuming the peak loads of the other four regions are x1, x2, x3, and x4, we can write: Total peak load = 15000 + 8000 + x1 + x2 + x3 + x4 We do not have information about the other four regions, so let's assume they each have a peak load of 10,000 kW: Total peak load = 15000 + 8000 + 10000 + 10000 + 10000 + 10000 = 58000 kW Therefore, the generating station needs to be able to supply a peak power of 58,000 kW to meet the combined peak load of all six regions. To determine how much power is needed to fulfill each region's requirement, we need to divide the total peak load by the number of regions: Power needed per region = Total peak load / Number of regions = 58000 kW / 6 = 9666.67 kW Therefore, each region needs a peak power of approximately 9666.67 kW to fulfill its requirement.
What is the difference between Base loads and peak loads in power system?
What is the difference between base and peak load?Load is the amount of power in the electrical grid. Base load is the level that it typically does not go below, that is, the basic amount of electricity that is always required.Peak load is the daily fluctuation of electricity use. It is usually lowest in the wee hours of the morning and highest in the early evening. It also varies seasonally.Are base and peak loads provided differently?Base load is typically provided by large coal-fired and nuclear power stations. They may take days to fire up, and their output does not vary. Peak load, the variable part of the electrical supply and demand, is provided by more responsive and smaller plants whose output can be quickly ramped up and down or that can even be quickly turned on and off.
What is the peak load of a power supply?
A: A power supply when designed it will have some nominal criteria and also some maximum output power available which reflect to the peak load that it can stand without burning up
What is the conversion for rms power to peak to peak power?
RMS power is Peak-To-Peak power divided by the square root of 2.This definition, however, only holds true for a non-reactive, or resistive, load, with a power source that is truly sinusoidal.
What has the author Michael K Berkowitz written?
Michael K. Berkowitz has written: 'A note on production inefficiency in the peak-load pricing model' -- subject(s): Economic aspects, Economic aspects of Peak load, Electric utilities, Labor productivity, Mathematical models, Mathemicatical models, Peak load, Rates 'Production inefficiency in the peak-load pricing model' -- subject(s): Economic aspects, Economic aspects of Peak load, Electric utilities, Mathematical models, Peak load, Rates 'Power grid economics in a peak load pricing framework' -- subject(s): Economic aspects, Economic aspects of Peak load, Electric utilities, Mathematical models, Peak load, Rates
What state is voltage and current simultaneously peak?
Voltage and current will peak simultaneously when the power factor is exactly +1 or -1. This only occurs with a resistive load or source.
When was Peak Forest railway station created?
Peak Forest railway station was created in 1867.
When did Peak Forest railway station end?
Peak Forest railway station ended in 1967.
Information about load shadding?
I think it has to do with the power being shut down to compensate the high demand during the peak time.
Is Comanche peak power plant in glen rose 76403 a nuclear facility?
Comanche Peak in Glenrose TX is a twin reactor power station. See link below for details. Two more reactors have been proposed.
What is the difference between rms value and average value of AC?
rms value of ac power = dc power in reference to heat production in pure resistive load So ac power of some rms value will produce the same heat in resistive load as dc power will of same value
What is peak shaving?
Peak shaving is a process from the electricity business: You shift demand from "peak times" (eg. noon) to times with lower demand (e.g. night) and thus "shave" the peak. You can do that e.g. with devices that do not need to run immediately like washing machines etc...
