0
It really depends on what you are looking for in a pool. A quick up pool will be ready for water in less that an hour while the frame pool will take a little longer and require some minor assembly. The frame pool can stay up through the winter with proper preparation and covering. The quick up pool can be taken down and stored more easily. Also consider the looks of both pools and which one you would like better.
What else can I help you with?
15ft X 36ft X 4ft pool how many gallons?
16,200 Pool & Spa
What size of gas pool heater do you need for a pool that is 15ft wide 35ft long and 5 ft deep?
idontknow
How many gallons of water in a 15ft radius x 3 ft deep pool?
3,489
How many more square feet would the 17ft pool use than the 15ft?
47ft2
How many cubic meters of water in a 15ft round swimming pool?
Assuming the pool is 4 feet deep, a 15ft round pool would have a volume of approximately 17.6 cubic meters of water. This calculation is based on the formula for the volume of a cylinder (V=πr^2h) using the radius of the pool (7.5ft) and its depth (4ft).
How many liters of water in a 15 ft dia pool?
How many litres of water in a intex easy set 15ft swimming pool with a depth of 36inches?
What is a frame pool?
a swimming pool with frames
How many gallons of water in 15ft by 52inch pool?
Cannot be answered with only these measurements. You need to specify what shape the pool is. Also, for a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.
How many gallons of water fill a 4ft deep x 15ft round pool?
5,287.7 gallons of water.
Which material is better to use in an inground liner pool galvanized steel frame or aluminum frame?
Galvanized steel. It lasts longer and is less affected by chemicals and saltwater if you choose to go that route. I do suggest saltwater. It needs for less maintance than a pure chlorine pool.
How much shock powder should you put in a 15ft by 42 pool?
To determine the appropriate amount of shock powder for a 15ft by 42in pool, you typically need about 1 pound of shock per 10,000 gallons of water. A pool of that size holds approximately 4,500 gallons. Therefore, you would use about 0.45 pounds (or approximately 7.2 ounces) of shock powder. Always refer to the specific product instructions for precise dosing, as concentrations can vary.
How do you remove sediment from a quick set vinyl pool?
To remove sediment from a vinyl quick set pool you will need a pool vacuum. Move the vacuum very slowly as you work so that it has a chance to catch everything.
