A butterfly valve is from a family of valves called quarter turn valves. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is open, the disc is rotated a quarter turn so that it allows unrestricted passage. The position of the disc is effected from outside the valve. And the Steel butterfly valve is one kind of butterfly valve , the main material is steel.
a valve is used for regulating the flow of a fluid by opening, closing or partially obstructing a passegway
:)
The correct answer would be as followsA "valve" can be used for positive shut off such as a gate or ball valve valveA Glove pattern valve is used for throttling and a needle valve is used fro fine adjustments such as use on oxygen and combustible lines.
Then there are check valves which in theory prevent back flow of mediums such as liquid or air
There are Leslie valves for example that are pressure reducing valves for steam stations..
For example the pressure a structure maybe as high as 125# and to make it more manageable one would use pressure reducing valves.
There is no one valve fits all applications
For certain high volume low pressure flow applications, butterfly valves or pneumatic controlled flapper valves are more than adequate to throttle the flow.
For high pressure and low flow control applications hydraulic blocks, balanced valves, needle valves and globe valves are preferred.
The butterfly valve is used to regulate the flow of fluid.that is quantity of fluid can be varied by operating this.
A butterfly valve is used to isolate or regulate flow in a system of pipes. Butterfly valves are usually lower in cost when compared to other types of vales, so they are usually favored.
The proboscis of butterfly is the long appendage on the head that works are a mouth. It is used for feeding and sucking.
There are lots of butterfly in Blue Springs Missouri. The mains one are Jackpot Butterfly, Earth Butterfly and the Moosefly. The Jackpot Butterfly looks like a slot machine. The Earth butterfly is nicknamed Willy. The Moosefly has horns.
A butterfly with a name starting with the letter v is the Viceroy butterfly. It resembles the Monarch butterfly but i has a black line that crosses its wings.
its a butterfly that lives in the middle east asia.
butterfly lion
Globe is used for throttling
because this valve has a centric line through it, and control by a stem going through the disc and drive it open just like a wing of butterfly, that is why it is called butterfly valve
The first carburetor butterfly valve was invented by Carl Benz in 1893.
A butterfly valve is from a family of valves called quarter turn valves. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is open, the disc is rotated a quarter turn so that it allows unrestricted passage. The position of the disc is effected from outside the valve. gas butterfly valve is one kind of butterfly valve, the main feature is that all the functions are supported by gas just as the Electric Butterfly Valve which supported by electric.
A butterfly valve is from a family of valves called quarter turn valves. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is open, the disc is rotated a quarter turn so that it allows unrestricted passage. The position of the disc is effected from outside the valve. gas butterfly valve is one kind of butterfly valve, the main feature is that all the functions are supported by gas just as the Electric Butterfly Valve which supported by electric.
The use of butterfly valves for control applications is limited to the valve opening range between 30 degrees to 70 degrees. Throttling using butterfly valves is limited to low pressure drop applications. Potential cavitation is a concern when butterfly valves are used. Also possibility of a choked flow is a concern.
a butterfly valve.
Yes, a butterfly value is a type of valve that is used to help control flow. It is a simple concept design that is very cost effective and likely to be used in various plumbing situations.
The only butterfly valve I am aware of is in the carbuerator and contols air flow. Few cans still use this item.
motor is used as a actuator here. we can use globe,ball,butterfly type valves
I would use a butterfly valve to set the flow and a pitot tube to measure it. Nexus Valve makes a good one and it is price competetive as well.
The throttle position sensor is a device that signals the position of the butterfly valve of the throttle body. The throttle body is the part that is between the air intake and the intake manifold. Disconnect the air intake from the throttle body then have someone press the accelerator pedal. Watch the butterfly valve open and close as your assistant presses down and lets up on the pedal and you should see the butterfly valve moving. On the end of the rod that passes through the butterfly valve should be a sensor that detects the position of the butterfly valve. THAT is the TPS. There will be an electrical connector.