EN8 also know as 080M40. An unalloyed medium carbon steel. EN8 is a medium strength steel, good tensile strength. Suitable for shafts, stressed pins, studs, keys etc. AISI 1040.
Available as normalised or rolled. EN8 is supplied as round drawn/turned, round hot rolled, hexagon, square, flats and plate.
Chemical Composition BS 970:1991/1983 Nearest Equivalent C Si Mn Ni Cr Mo S P % % % % % % % % En8 0.35/0.45 0.05/0.35 0.60/1.00 - - - 0.06Max 0.06Max 080m40
Chemical Composition BS 970:1991/1983 Nearest Equivalent C Si Mn Ni Cr Mo S P % % % % % % % % En8 0.35/0.45 0.05/0.35 0.60/1.00 - - - 0.06Max 0.06Max 080m40
Chemical Composition BS 970:1991/1983 Nearest Equivalent C Si Mn Ni Cr Mo S P % % % % % % % % En8 0.35/0.45 0.05/0.35 0.60/1.00 - - - 0.06Max 0.06Max 080m40 Chemical Composition BS 970:1991/1983 Nearest Equivalent C Si Mn Ni Cr Mo S P % % % % % % % % En8 0.35/0.45 0.05/0.35 0.60/1.00 - - - 0.06Max 0.06Max 080m40 C Si Mn Ni Cr Mo S P % % % % % % % % En8 0.35/0.45 0.05/0.35 0.60/1.00 - - - 0.06Max 0.06Max 080m40
C
Si
Mn
Ni
Cr
Mo
S
P
%
%
%
%
%
%
%
%
0.35/0.45
0.05/0.35
0.60/1.00
-
-
-
0.06Max
0.06Max
EN24 is a high quality, high tensile, alloy steel . Usually supplied readily machineable in 'T' condition, it combines high
tensile strength, shock resistance, good ductility and resistance to wear. EN24 is available from stock in round bar, flat bar
and plate.
TYPICAL ANALYSIS
EN24
C.
Si.
Mn
Ni.
Cr.
Mo.
0.40%
0.30%
0.60%
1.50%
1.20%
0.25%
Hardening:
Heat uniformly to 823/850°C until heated through. Quench in oil.
Tempering:
Heat uniformly and thoroughly at the selected tempering temperature, up to 660°C and hold at heat for two hours per inch of
total thickness. Tempering between 250-375°C in not recommended as this can seriously reduce the steels impact value.
Stress Relieving:
Heat slowly to 650-670°C, soak well before cooling the EN24 tool in a furnace or in air.
Mechanical Properties
Heat
Treatment
Tensile
Strength
Rm N/mm²
Yield
Stress
Re N/mm²
a% on
5.665ÖSo
Impact
Izod J
Impact
KCV J
Proof
Stress
rp0.2
Hardness
HB
Size
mm
T
850/1000
654
13
40
35
635
248/302>150≤250
T
850/1000
680
13
54
50
665
248/302>63≤250
U
925/1075
755
12
47
54
740
269/331>29≤100
V
1000/1150
850
12
47
42
835
293/352
>13≤63
W
1075/1225
940
11
40
35
925
311/375
>6≤29
X
1150/1300
1020
10
34
28
1005
345/401
>6≤29
Z
1550
1235
5
10
9
1125
444
>6≤29
Material with a granitic composition that erupts at the surface is called rhyolite.
You must be familiar with working material composition; you can not do with insufficient material knowledge a chemical industry.
its 7.8kg/m3 @ 20degree celsius
physical change
What is talisay?
En8 is low carbon steel and it can be toughned. En24 is medium carbon steel and it is generally called forged steel.
the yield strength of EN8 material is 465MPa.
European Norms
Material with a granitic composition that erupts at the surface is called rhyolite.
composition and material
800n/mm2
No to both.
You must be familiar with working material composition; you can not do with insufficient material knowledge a chemical industry.
42 to 45 HRC
its 7.8kg/m3 @ 20degree celsius
a substance
I want to know that composition of R55 cast steel percentage.