0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why are concave mirrors used in headlights of cars?
Car headlamps use parabolic mirrors to concentrate and focus the light in one direction. Without these mirrors, one would either waste the undirected light or the light would shine in all directions, which would blind the driver.
Does the use of mirrors increase light?
Sort of. The concave mirror will collect all the light of a larger area, and concentrate it into a small spot. This will not change the colour temperature of the light, but will increase the watts per square centimetre at the focus.
Write down about all the uses you make of mirrors?
•Write down about all the uses we make of mirrors?
Define the principal focus of a concave mirror?
It is the point at which all light rays seem to diverge from in the case of a concave mirror
Can mirrors reflect light?
Yes. Mirrors reflect all wavelengths of visible light and possibly some infrared or ultraviolet.
What is the difference between parabolic and concave mirrors?
In the case of concave mirrors parallel rays, parallel to the principal axis and incident near the pole(axial rays), after reflection will converge to the principal focus.Rays reflected from the marginal portions of the mirror(marginal rays) will converge to points nearer than the focus. Due to this the image formed by a concave mirror of large aperture will be blurred. This defect is called spherical aberration. This defect can be overcome by using parabolic mirrors. In a parabolic mirror all the rays, axial rays as well as the marginal rays, incidenting on it after reflection will converge to the same principal focus. This is due to the geometric property of the parabola, that is parabola allows only one focus.Hence in a parabolic mirror there is no spherical aberration and the image will be sharp and clear.
What is the cause of the defect that exist in all single lenses?
defect that exist in all single lenses:1. Spherical aberration2. Chromatic aberration
Why are concave mirrors used in the head light of vehicles?
Concave mirrors are used because they will reflect a light source inside the curve in one general direction. To be more specific, the mirrors are close to parabolic. Parabolas have the property that light beams generated at the focal point of the parabola are all reflected parallel out of the mirror.
When backing what is the best definition of the big piucture?
Visibility from all directions. This can best be achieved by looking in all directions before backing and then checking your mirrors on each side of the vehicle. Better view is obtained when using "spot" mirrors but one has to remember that images are closer than they appear in those smaller concave mirrors.
What is a convex mirror and what is it used for?
Convex mirrors are also curved mirrors, but the silvered surface bulges outward instead of inward, as with the concave spherical mirror. As with all mirrors, the angle of incidence of a ray of light is equal to the angle of reflection with respect to a normal on the surface. On a curved surface the normal changes with the curvature. Therefore, the light rays will diverge from the object. If the rays of light are extrapolated back to the point where they converge, this will be the point where the image is formed. For reflections off a convex mirror, the image is virtual and upright. Use of Convex Mirrors: Convex mirrors are often used in car wing-mirrors because they have a greater field of view than a similar plane mirror. However the greater field of view is at the expense of making objects seem further away than they are in reality. Hence the expression seen etched on to the mirrors, 'Objects in Mirror are Closer than they Appear'. Concave mirrors are also used as security mirrors as they enable the viewer to see over a greater region of space another use for this mirror is used in making sunglasses and telescopes. bet you didn't know that did u ???
Which type of telescope uses concave mirrors to increase the size of the image being viewed?
Refracting
Why are concave mirrors used in headlights of cars?
Car headlamps use parabolic mirrors to concentrate and focus the light in one direction. Without these mirrors, one would either waste the undirected light or the light would shine in all directions, which would blind the driver.
Is an acute angle a concave or convex angle?
All angles < 180 degrees are concave. An acute angle is < 90 degrees. So, all acute angles are concave.
Does the use of mirrors increase light?
Sort of. The concave mirror will collect all the light of a larger area, and concentrate it into a small spot. This will not change the colour temperature of the light, but will increase the watts per square centimetre at the focus.
Can a polygon be concave?
Yes. All polygons with 4 or more sides can be concave. An arrowhead is an example of a concave quadrilateral. The back of an envelop (where the sides are folded and glued together) is a concave pentagon.
What is a nonconvex polygon?
A nonconvex polygon is a concave polygon. All polygons with 4 or more sides can be concave. An arrowhead is an example of a concave quadrilateral. The back of an envelop (where the sides are folded and glued together) is a concave pentagon.
How many nodes of all types does a 3d orbital have?
one spherical node & 2 non-spherical one.
