0
Disk failure is about the malfunctioning of the disk storage device that is caused by booting the computer from the files. The disk storage device will no longer perform well and it is needed to be troubleshoot.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
17xx post error indicates?
17xx Fixed disk (hard drive) 1701 Fixed disk adapter 1702 Fixed disk adpater 1703 Fixed disk drive 1704 Fixed disk drive or adapter 1780 Fixed disk 0 failure (C drive failure) 1781 Fixed disk 1 failure (D drive failure) 1782 Fixed disk controller failure 1790 Fixed disk 0 1791 Fixed disk 1
Who is general Failure and why is he reading your hard disk?
Apparently, General Failure is an employee of the NSA.
What diagnostic tool is used to trouble shoot the hard disk failure?
Emergency boot disk
Diagnose a hard disk failure?
check hard disk power cable IDE cable check
What is head crash?
A head crash is a type of hard disk failure that occurs when a read/write head touches the fast spinning disk platters. It is very catastrophic - it can destroy lots of data - even the data needed to start an operating system can be destroyed.
Computer blue screen errors unmountable boot volume?
This indicates one of several problems with the boot disk: Possibly not connected properly Possibly not "JUMPERED" properly Possible drive failure Possible disk controller failure Possible disk file corruption.
It says Disk boot failure Insert System Disk and press enter What should you do when you have this error?
A Disk Boot Fail means that the disk you normally start your computer from is not working. The computer can be started from the System Disk but that system disk will wear out so you will have no boot disk and no way of repairing the boot disk. Time to look for a new boot disk or better a brand new computer
What enables the smooth recovery of the file system following a system crash or disk failure?
NTFS
What volumes use parity information to rebuild data in the event of a disk failure?
RAID-5
What deficiency is associated with RAID 0 compared with RAID 1?
RAID 0 is "Stripping" and RAID1 is "Mirroring". RAID0 doesn't provide fault tolerance but RAID1 does provide fault tolerance because it has a every disk has a mirrored disk so that in case of disk failure the other disk can be used.
Why is hard disk sealed?
The hard disk enclosure is sealed with a filter so that the disk can operate without impurities getting in the way. A single particle of smoke is several times larger than the distance between a disk and the read/write head. Anything that is even that small and certainly anything larger like a dust particle, would cause problems and probably disk failure.
What is function of raid in server?
Data is stored Physically on Hard disk drives & Other forms of storage media. Failure or Data Corruption on Disks results in Loss of DATA & can result in Complete Failure of the System.RAID (Redundant Array of Independent Disks) is a Disk Subsystem Storage that improves performance & provides redundancy to the System attached.
