0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Is there a platinum ratio if there is a golden ratio?
No. There is no platinum ratio.
What is the mass ratio of pennies to nickels?
The ratio is 1:2The ratio is 1:2The ratio is 1:2The ratio is 1:2
What is the ratio of C12H22O11?
The ratio of C12H22O11 to WHAT!
How the ratio of volume is related to ratio of sides of similar cubes?
The ratio of volumes is directly proportional to the cube of the ratio of their sides. And, incidentally, all cubes are similar.
What is 4 percent as a ratio strength?
The ratio is 1:25 4 percent as a ratio is 0.04 : 1
How do you calculate sprocket rpm?
calculating sprocket RPM is very easy if you know what the RPM of the drive sprocket is. If you know that then it is a simple fraction problem. If you make the drive gear the numerator or the top part of the fraction and the driven gear the denominator or the bottom part of the fraction (DRIVE/DRIVEN) I.E. if the drive sprocket has 25 teeth and your driven sprocket has 100 teeth (25/100) that will reduce to (1/4) or a 4:1 ratio. So if your drive sprocket is spinning at 1000 RPM then your driven sprocket will be spinning at 250 RPM. You can plug your specific sprocket tooth count into that equation and come up with the right answer.
What is the relationship between driven gear and drive gear?
The ratio is the driven gear divided by the driver gear. This determines the gear ratio.
How do you calculate a gear ratio of a 5 tooth drive gear and a 15 tooth driven gear?
You take driven divided by drive. 15 divided by 5 is 3. So the ratio would be 3:1
What are teeth on bmx?
In the drive train you have the front chainwheel/ring and the rear sprocket that both engage the chain. The pointy bits on sprocket and chainwheel which allows the chain to grip are called teeth. The ratio between the tooth counts is what determines which gear ratio the bike has.
How do you calculate a gear ratio of a 9 tooth Drive gear?
Number of teeth on driven gear divided by teeth on driven gear.
How do you work out sprocket sizes for bmx?
Divide your rear sprocket into your front sprocket. Like 25x9. 25 divided by 9 = 2.77. so 2.77 to 1 is the drive ratio. If you go with a smaller sprocket like a 24 in the front but still a 9 in the back, you are lowering the gear ratio to 2.66 to 1. So your bike will be slower but easier to pedal. If you go with a 25 in the front and a 10 in the back, you end up with a 2.5 to 1 ratio. Don't confuse gear ratio with gear inches, that's a calculation including the wheel and sometimes the circumference of the tire.
What is the size of the stock sprokets on a 1991 Honda nighthawk?
I have a "Clymer Honda CB 750 Nighthawk 1991-1993 & 1995-1999" book. It says for sprocket sizes, "Drive Sprocket 15 teeth, Driven Sprocket 38 teeth". Nothing else listed in there or in the Owner's Manual as to size.
How fast will a 2003 Kawasaki KX 60 go?
About 40 miles per hour depending on the final drive (sprocket) ratio.
What is the ratio between an 11 tooth sprocket and a 53 tooth sprocket?
Just a little short of 1:5
What is the best sprocket combination for Yamaha 135lc?
The best sprocket comb for lc135 is 15 37 which the ratio is 2.47
What are gear ratios?
The gear ratio is the number of teeth in the driven gear divided by the number of teeth in the drive gear.
If you have motor rpm motor shaft sizeblower pulley size how you get blower rpm?
Drive Pulley = pulley on motor Driven Pulley = pulley on blower First determine your Ratio - divide large pulley size by small pulley size this will give you gear ratio, Example 2" drive pulley and a 4" Driven Pulley = 2:1 gear ratio If you know your motor shaft RPM divide that number by the ratio to get the RPM of the driven pulley, if your shaft rpm is 1800 rpm you would divide 1800 by 2 which would = 900 rpm on your driven pulley if your drive pulley is larger than than your driven pulley you multiply the rpm by the ratio example 1800 rpm x 2 = 3600 rpm
