Function of the KWH meter is to record the electrical energy.
No. For three phase, you need a minimum of a two element meter.
To answer this question the rate at which your utility company charges you has to be stated. The cost of a kWh will be found on your electrical bill. Multiply that charge by 1000 which represents the 1000 kWh that was read on your house meter.
The number of revolutions the disk in a kWh meter needs to make to produce a read increase of one unit (1 kWh) is 1000 divided by the disk constant. The disk in a meter with a 7.2 constant (Kh = 7.2) will have to make 138 and 8/9 revolutions to make the right most dial in the meter increase its read by one unit.
If, Ct value = 50 meter unit = 30 so, 50 x 30 = 1500 kwh
Function of the KWH meter is to record the electrical energy.
it also depends on what meter you have, is it a KWH METER or a AH METER. IF ITS A KWH METER(KILO WATT HOUR) IT COUNTS IN WATTS (35w PER HOUR.)
Electricity Meter. I've never heard that term. The other terms are also foreign to me and I have been using measuring equipment for over 40 years. I have never seen a meter that will actually show kWh. An electrical USE meter (like what is on your home) shows kWh used. More explanation in the question would help.
the value 'n' of meter constant indicates that consumption of energy is n KWh.
Multiply the figure by your cost per kwh. The kwh cost is available from your local power company or utility. For instance, if a kwh was priced at 7.6 cents/kwh, then the total cost would be a bit over $30.
No. For three phase, you need a minimum of a two element meter.
To answer this question the rate at which your utility company charges you has to be stated. The cost of a kWh will be found on your electrical bill. Multiply that charge by 1000 which represents the 1000 kWh that was read on your house meter.
The electric meter uses kWh (kilowatt x hours) as units; a Joule is a watt x second. Therefore, a kWh has 3.6 million joules. Just multiply by this number.
The speed of a single phase digital meter 1600mp or kWh 50HZ can be reduced. By decreasing the voltage to reduce the speed of the single phase digital meter the motor is to decreased in speed meaning the consumer load will be decreased as well.
trivector meters are used to measure kVAh and also kVA of maximum demand.it has a kwh meter and reactive kvah meter in a case with special summator mounted between them.
for a disc type (electromechanical) meter the number of disc revolutions to indicate 1 kwh would be found by the formula 1000/ Kh, the watthour constant of the meter.
kWh stands for kiloWatthours, the amount of electrical energy an appliance uses or generates in one hour measured in kiloWatts. It has nothing to do with one cubic metre of water.