0
What else can I help you with?
How can design stick-slip machine?
Stick-slip machines are designed to provide more controllable motion than a traditional electric motor. The basic design consists of a motor a control board and a stick-slip mechanism. The motor is used to provide the power to move the stick-slip mechanism while the control board is used to regulate the speed and position of the mechanism. The stick-slip mechanism consists of an elastic element such as a spring or rubber band that is connected to a shaft. When the shaft rotates the elastic element is compressed and then released creating a stick-slip effect. To design a stick-slip machine the following steps must be taken: Choose an appropriate motor and control board. Design the stick-slip mechanism and select an appropriate elastic element. Select the appropriate shaft and bearing system. Integrate the motor control board stick-slip mechanism and shaft into a single system. Test the system and adjust as necessary for optimal performance.By following these steps it is possible to design and build a reliable controllable stick-slip machine.
How can you stretch elastic waistbands that are too tight?
The possibility of expanding an elastic waistband depends on a couple of things. First, does the rest of the garment fit (bust, hips)? Secondly, is the elastic in the waistband loose or sewn in place. If the elastic is loose, the process will be much easier: in the inside of the garment find a place where you can open the casing about 2"-3" so you can gain access to the elastic; pull out a loop of the elastic; secure the elastic on both sides of the opening with pins so the elastic doesn't slip back in the casing; cut the elastic; add a piece of elastic to expand your waistband, remembering to allow approximately 1/2" of overlap on both ends & sew securely; now you can remove the pins securing the elastic & allow the elastic to slip back into the casing; stitch the casing closed. However, if your waistband elastic is stitched in place all the way around, as is the case with many ready made garments, you will have to remove all the stitching first before adding more elastic, remembering to allow approximately 1/2" of overlap on both ends; carefully pin the elastic back in place and resew in place with an elastic stitch that will not break but stretch with the elastic.
What happens when the stress and strain of elastic deformation along tectonic plates reaches the breaking point?
When the stress and strain along tectonic plates reach the breaking point, it can result in an earthquake. This is when the stored elastic energy is released as seismic waves, causing the rocks on either side of the fault to move, releasing the built-up stress.
Can be stretched and then return to its own shape?
elastic
What is the suffix for elastic?
suffix for elastic
Why is Elastic Clause called Elastic Clause?
It is called Elastic Clause because it can be stretched like elastic.
What will be the total higher quantity do in the elastic inelastic and unit-elastic?
The midpoint between elastic and inelastic is unit elastic
Is lay taxes elastic enumerated or denied?
elastic clause ~smooched~
Is a BMW an elastic or inelastic?
elastic
What is one word for elastic and non-elastic properties?
"Flexibility" is one word that encompasses both elastic and non-elastic properties.
What are the types of supply elasticity?
Types of elasticity of supply1) Perfectly elastic supply2) Relative elastic supply3) Unitary elastic supply4) Relatively in elastic supply5) Perfectly in elastic supply
Is steel elastic?
Steel is not so elastic, but it definitely is elastic because of chemical composition.
