A check engine code 332 for a 1994 Mazda 626 means that the EGR valve's voltage is lower than it is expected to be. The ERG valve is part of your Mazda's emission control system.
The check engine light on a Mazda CX7 can be turned off by attaching an OBD II code reader. It can both read the engine codes and turn off the check engine light.
Click the link.
Go to AutoZone and ask one of the fellas to come out and "check your check engine light code". They will be able to tell you what the problem code is, as well as re-set your check engine light.
Trouble code P0171 means:System too lean (bank 1)
misfire cylinder number 6
The code partially is "stamped" on the head.a 1.8 dohc 16v engine is called BP, the 8v is called b8, b6 is for the 1.6 engine, z5 is for the 1994+ 1.5 dohc 16v engine, b5 is the 1.5 before this
Use a code reader to find out why the check engine light is on.
Trouble code P1797 means: Clutch Pedal Position Switch/Neutral Switch Circuit
Get a code read out from your engine computer and it will tell you what is wrong.
If the check engine light is on, use a code scanner to find out why.
Powertrain Control Module +B Voltage Low
torque converter clutch solenoid circuit
Trouble code P0421 means:Warm up catalyst system efficiency below threshold
Trouble code P1460 means: Wide Open Throttle A/C Cutout Circuit
Trouble code P1507 means: Idle air control (IAC) underspeed error
Trouble code P0171 means :System too lean (bank 1)
Trouble code P0421 means: Catalyst Efficiency Below Normal (Bank 1)
Oxygen sensor stuck lean.
1990 Mazda 323:The check engine light intermittently flashes a series of long and short intervals. A long flash is followed by 5 short flashes. Then another long flash is followed by 7 short flashes, a pause, and 9 more short flashes. How should I interpret this code?
Trouble code P0153 means: O2 Circuit Slow Response (Bank 2, Sensor 1)
Trouble code P0705 means:Transmission range sensor circuit malfunction (PRNDL input)
The engine code is the 8th digit of the VIN.
what year????????????? Check engine light diagnosis depends on the model year of your vehicle. 1995 and later models have the OBDII system and require a scan tool to retrieve the trouble codes. For 1994 and earlier models, you can check out a manual (Haynes or Cilton) at your local library and read how to manually retrieve the codes - also what each code refers to.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
Mazda 626 1.8Ltr 1997-2002 Engine code FP Is an interference engine.