0
What else can I help you with?
How sl100 Function?
function of sl100
What is the function of AT89C51 microcontroller?
AT89C51 function
What switch performs a control function?
Every switch performs a control function. On / Off is a control function.
What is function of UM66?
what is the function of ic UM66.plz tel me
The basic function of a transformer is to change?
The basic function of a transformer is to change voltage levels.
What is Demultiplexer in Digital Logic Design?
45A demultiplexer is the opposite of a multiplexer. In electronic devices, a demultiplexer is a logical circuit which takes a single input and sends out this input to one of several outputs available. During this process the output that has been selected is assigned the value 1, while the other outputs are assigned the value 0. The definition is slightly different when we are talking about demultiplexers in the context of networking. In the networking context, a demultiplexer is a device that receives multiple signals that have been transmitted on one line and then decodes these single line signals into separate multiple signals. A demultiplexer is usually always used in tandem with a multiplexer. Demultiplexers can be analog demultiplexers or digital demultiplexers. Digital demultiplexers generally function as decoders.
What is the application of demultiplexer?
A demultiplexer is an electronic device that separates a multiplex signal into its component parts. It is used when a circuit wishes to send a signal to one of many devices.
How the demultiplexer work?
A demultiplexer takes a single input and routes it to one of several possible output lines based on the control inputs. It essentially reverses the process of a multiplexer, allowing a single data line to be distributed to multiple destination lines. The demultiplexer selects the output line by decoding the control input signals.
What are the application of demultiplexer?
Demultiplexing, or separating several previously multiplexed signals.
How do you draw 16 to 1 demultiplexer?
To draw a 16-to-1 demultiplexer, start by creating a box labeled "16-to-1 Demux" with one output line and 16 output lines. Connect 4 select lines (S0, S1, S2, S3) to the input of the demultiplexer to control which of the 16 outputs is activated. Draw the 16 output lines branching from the box, labeling each output from Y0 to Y15. Finally, indicate that the single input signal is fed into the demultiplexer, which directs it to one of the 16 outputs based on the selected input combination.
What is the application of demultiplexur?
They find use in Clock demultiplexer,Security monitoring system,Synchronous data transmission system
Why is Synchronization a problem in data communication?
synchronization between the multiplexer and demultiplexer is a major issue in data transmission. if the multiplexer and demultiplexer are out of synchronization a bit belonging to one channel may be received by the wrong channel. for dis reason , one or more synchronization bits are usually added to the beginning of each frame. these bits, called framing bit , follow a pattern, frame to frame, that allow the demultiplexer to syncronize with the incoming steam so that it can separate the time slots accurately. in most cases, this syncronization information consists of one bit
Introduction multiplexer demultiplexer?
A multiplexer, commonly referred as an input selector, is a circuit with many inputs but only one output: it has some data inputs, control inputs and one output, depending on the control inputs, one input from the data inputs is sent to the output .A demultiplexer is a circuit with one data input, few control inputs and many outputs, it is also known as output selector.
Why is it necessary to synchronize mutiplexer and demultiplexer in time division multiplexing?
It is necessary to synchronize the mutiplexer and demultiplexer in time division multiplexing because the multiplexor is encoding data onto the carrier at certain points in time. (This is why its called Time Division Multiplexing) The demultiplexor most know when the data of interest are present in the carrier, hence the need for synchronization. Note that there usually is a transmission delay between the multiplexor and demultiplexor. As a result, while the demultiplexor is in sync with the multiplexor, it is not necessarily in phase. The crucial point is that the data and clock be in sync and in phase at the demultiplexor.
What is the difference between multiplexer and demultiplexer?
A multiplexor is a device that takes two or more signals and encodes them on fewer (often, on one) wire. A demultiplexor is a device that reverse that process.
What is logic connections?
Logic connections refer to the means by which different elements or components are linked together in a logical sequence or relationship. This can involve using logical operators such as AND, OR, and NOT to define how different conditions or statements are connected and evaluated in a logical system or argument. These connections help to create coherent and structured reasoning within various fields like mathematics, computer science, and philosophy.
A formula prewritten by excel is called?
Function
