The NOP instruction is short for no-operation. It is an executable instruction that does nothing to the processor, its registers, or its flags. It is useful in timing loops, or to provide room for patchabilty of a piece of code.
A microprocessor has three major parts for it to function. I/O. arithmetic's and control. All of these parts interact to process data and the actual distance to do so becomes problematics as speed increases So these processes are implemented into one package as a unit therefore processes integration
The central processor unit (microprocessor) is placed on the motherboard. The cooler, necessary to refrigerate the microprocessor is placed behind it.
The clock signal in a microprocessor allows synchronization of several components of the microprocessor. The correctness of the computation of the microprocessor depends upon efficient and balanced distribution of the clock signal. The clock generator generates the clock signal.
hi bye i hate yo! Marcian Hoff was one of the inventors for the microprocessor. The microprocessor is like the engine for the computer. When you turn on the computer the microprocessor helps the computer start.
How to write a program for mouse in microprocessor?
The NOP (No Operation) instruction takes time but does nothing to the data or the status of the microprocessor. When executed in a loop, it can take substantial time, from microseconds, to milliseconds, to seconds.
no operation is not performed
The NOP instruction is a no-operation instruction. It does nothing to the state of the machine, except to use some time. In the case of the 8085, it uses four clock cycles plus however many wait states are need to access the NOP instruction from memory.
halt,DI (disable intrupts ),EI (enable intrupts),NOP(do nothing)
The BIOS function in the 8086 microprocessor is called an interrupt function. It is an interrupt function because it is not called by a function call instruction.
it has a memory
microprocessor
the principle function of memory interfacing is to enable the microprocessor to read or write into a register of the memory chip
Pins 1 and 20 in the 8086 microprocessor are (both) power and signal ground (GND).
The main function of this part of the computer is to read scripts and process computer programs.
It provides timing signals.
task baricon barfree space