0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What type of Glass?
Glass is an amorphous or transparent solid. Glass is also called supercooled liquid. Types of glasses are : soft glass, hard glass, crook's glass, jena glass, glass laminates
If you have a 4 oz and a 9 oz glass how do you get 6 oz of water?
Fill the 9oz glass. Pour the 9 oz glass into the 4oz glass until the 4oz glass is full. You now have 5 oz in the 9oz glass. Empty the 4oz glass Pour pour the remaining water from the 9oz glass into the 4oz glass until it is full. You now have 1 oz in the 9oz glass. Empty the 4 oz glass. Pour the remaining 1oz in the 9oz glass into the 4 oz glass. Fill the 9oz glass. The 4oz glass with 1oz in it can now fit a total of 3 more oz. Pour the 9oz glass into the 4oz glass until it is full. You now have 6oz in the 9oz glass.
What are the instructions for glass fusing?
The instructions to do glass fusing include melting glass at a high temperature to join and fuse glass together. One may need to use a glass kiln to successfully fuse glass.
Which plug is safe to use in the 3 pin plug?
3 pins plug
What is a glass divider?
a glass divider is a glass panel used to divide rooms.
What happens if glass falls into spark plug hole?
Um, you probably shouldn't have had glass around the open spark plug hole in the first place. this could make it hard for your spark plug to fit into place, or even send the spark to the cylinder. You will have to take apart the head and remove the glass depending on how big the shard, or piece is.
How do you get shattered glass out of a plug hole?
Remove the trap below it and clean it out - very simple.
What happens when my rear defrost in my car does not work but the light at the dash is on?
You probably have a broken connection at the back window. First look at the connections on the glass. The wires on the glass lead to a plug. See if it is unplugged or if the connection has been torn off the glass. There may be two plug's. If they appear to be ok then check the wires on the glass. They are glued on the glass surface and if something has scratched them or cut the connection at some point it's just like cutting a wire.
What is glass plug in laboratory?
chupzz idk y de hell yuh aski ng
How do you replace the headlight bulb located on a 2000 Mazda MPV?
Pull out the plug(there's a squeeze tab to squeeze) from the bulb's terminals. Pull off the rubber thingy. Unhook and swing away the wire retainer. The bulb will pretty much fall out. Do not touch the glass of the new bulb as oil is bad for the glass when hot. Put the new bulb in noting the positions of the tabs. Swing the wire retainer back over the bulb's case and hook it closed. Press the rubber thingy on. Plug the plug in.
Where does oil go in klx110?
Oil filler plug is on the right side/top of the case. There is a sight glass with 2 lines that show oil low/high levels.
How and why does a spark plug break safety glass?
They do not break(shatter) laminated saftley glass like windshields, I think you mean tempered safety glass as used in doors. It has to do with hardness. Glass is actually "harder" than iron on the Mohs scale, and spark plug ceramic (technically called "aluminum oxide ceramic") is much harder than glass. Aluminium oxide ceramic actually rates a 9 on the Mohs scale; diamonds are 10, glass is 6.5, and iron is 4.5. That's the key to the whole thing, and why it's surprisingly hard to break a window with a hammer and surprisingly easy to break it with a small, light little shard of innocent white spark plug ceramic. (via http://www.ridelust.com/obscure-burglary-tools-of-the-day-ninja-rocks/) Other answers (not accurate, read comments below) include: - A spark plug is heavy this would be no mystery but if you mean how does the ceramic from a sparkplug break safety glass than your question will be answered. - The ceramic from a sparkplug attracts negative electrons (Negative Static) A cars side or rear window (Tempered Glass ie safety glass) has positive electrons (Positive Static) If one were to throw a peice of sparkplug ceramic at a car window the first part of the ceramic that touches the window creates a miner spark explosion which temporarly weakens the glass to an extreme point than the rest of the weight of the ceramic breaks the glass. - You can shatter a car window with a piece of ceramic from a sparkplug about the size of your pinky finger nail. - Last I checked, POSITIVE electrons are positrons, a component of antimatter...rather overkill to cause a nuclear event just to break a window. Rethink your physics.---Although the answer is not correct... a positive electron can also be considered a hole, or rather a lack of an electron... not necessarily your exotic anitimatter.
Is it safe to use glass bottles to burn incense and how do I do this?
You can use a plug of heat retardant material such as rubber, or cork and jam the incense into it. It is not wise to put a hot object into a glass object that is not specifically made for heat retention, such as a candle holder or jar for candles. It can explode. Also once the incense ember gets into the glass it has a very big chance of snuffing out prematurely due to lack of oxygen.
How do you plug in drums guitar and microphone on band hero?
first spin around 6 times in a circle run to your refrigerator drink a glass of chocolate milk (must be chocolate or wont work), then jump as high as you can 5 times then get on a flight to china, get some instructions, then go plug in the drums, guitar and microphone
Where do you plug in headphones to the LG Shine?
in the plug in the plug in the plug
How globes are made?
True snow globes are made of glass, a plug that fits into the opening in the glass, liquid, interior design, glitter or "snow" and a base. (There are also plastic snow domes, but that's a little different.) The interior design must be created so that it is small enough to fit into the opening of the globe and not too tall to be distorted by the liquid and glass shape. The small sculpture has to be safe in liquid, and if painted, the paint must be treated so that it will not "bleed' dye into the liquid over time. The sculpture or design is glued to the rubber plug and allowed to dry. The globe is placed upside down (hole facing up) and partially filled with liquid. Glitter or "snow bits" are dropped into the liquid. When the sculpture has completedly dried on the plug, ease the sculpture into the liquid, and slowly push the plug into place, displacing liquid slowly. If the liquid doesn't drip over the side, you don't have enough liquid and a bubble will develop. When the plug is pushed into place, turn the globe right side up and place into the base. The base must have an indent to hold the plug. This is usually glued into place. Allow to dry and cure, then shake.
What are the different types of glass wares?
soft glass Hard glass crown glass flint glass glass ceramics etc
