it is what bees protect their hives with
If you've seen Jurrasic Park, you would know it's amber.
frozen fossil
Baltic amber is often believed to be tree sap but it is resin from the tree. Baltic amber is sometimes sold as jewlery. It can be classified as a gem stone though it is simply hardened tree resin.
is when you eat something and you vomit it LOOOL
Amber is tree sap that hardened millions of years ago (in the usual way sap released from a tree hardens) then was fossilized.
AMBER
amber
If you've seen Jurrasic Park, you would know it's amber.
Resin casting is done by use of a mold and a mixture made with a form of liquid synthetic resin. It is then poured or injected into the mold and left to sit until hardened.
frozen fossil
Baltic amber is often believed to be tree sap but it is resin from the tree. Baltic amber is sometimes sold as jewlery. It can be classified as a gem stone though it is simply hardened tree resin.
Orthopedic casts were used by ancient Egyptians. They were made of tree bark and linens and hardened with wax and resin.
the answer is that...... fossil amber or fossil in asphalt
is when you eat something and you vomit it LOOOL
Amber is tree sap that hardened millions of years ago (in the usual way sap released from a tree hardens) then was fossilized.
Yes, resin can preserve objects by encasing them and protecting them from external elements such as moisture, dust, and UV rays. The hardened resin creates a barrier that prevents degradation and can keep objects in their original state for a long time.
You do not want to use a glass mold when casting resin. Resin is a two-part compound that, when mixed in proper proportions, becomes completely hard when dry. When casting resin, you want to use a flexible mold, such as a silicone mold, to cast it. Once the resin has hardened, you can flex a silicone or rubber mold, stretching and bending it to allow air between the mold and the shape, which allows the mold to release the resin form. The mold will revert back to its original state after the form has been released. A glass mold has no flexibility. If you cast resin in a glass mold, the resin will harden exactly the size of the cavity in your glass mold. While it will not bond to the glass, the result is the same. Once the resin is hard, there will be no way for air to come between the resin form and the glass mold. The resin will essentially be vacuum-sealed in place. If you have a more complex form, such as a rose shape, the resin will be stuck in place permanently. A more simple shape, such as a square, might release over time. If you set the mold upside-down, a combination of gravity, and the effects of temperature and humidity on the glass and resin, may release the resin after many weeks or months. If you have already cast your resin into the glass mold, your only option will be to wait to see if the cast will eventually release, or carefully break the glass mold from around the resin.