It is defined as the quantum of heat genarated when 1 kg of HSD is burnt under standard conditions.
When we are making a thermodynamic analysis of a system where diesel fuel is combusted we use the heating value of the fuel. You must determine whether you should use the higher heating value (HHV), or lower heating value (LHV), based on the application. Hope this helps.
The heating value when water is released in the liquid phase during fuel combustion is called the lower heating value (LHV) or net calorific value (NCV). It considers the latent heat of vaporization released as water transitions from liquid to vapor during combustion. The LHV does not include the heat energy that would be obtained from condensing the water vapor back into liquid form.
3,000 Btu/lb (3,000 British thermal unit/pound)
at what pressure you operate your gas line or Gas turbine then at what pressure you pay your gas bill gas haet value at standard condition is diffent from heating value at operation condition
They are more enviromental friendly then coal or oil. Natural gas burns cleaner than heating oil, and does not leave product, like ash, behind. Has high heating value of 24,000 Btu per pound.
it is 46000kj/kg
LDO means light disel oil HSD means high speed disel
HSD is normally used as a fuel for high speed diesel engines operating above 750 r.p.m. i.e. buses, lorries, generating sets, locomotive, pumping sets etc. Gas Turbines requiring distillate fuels normally make use of HSD as fuel. LDO is used for diesel engines, generally of the stationary type operating below 750 r.p.m. There are two grades of HSD, being marketed by Bharat Petroleum. These are HSD normal and Hi-SPEED - a premium branded HSD fuel.
High Speed Diesel
Lower Heating Value (LHV) MJ/kg = 43.4 Higher Heating Value (HHV) MJ/kg = 46.5
he didnt from the hsd
High Speed Diesel
High speed diesel
The total amount of chapters that have nudes in the HSD Kenichi are approxmately around four hundred and nineteen and must be read with careful diligence.
There are multiple methods of determining the heating value of fuels dependant upon the compounds present. Generally either the constituents and quantities of the compounds in the fuel are determined and the known heating value of each compound is used to determine heating value of the fuel; or a total calorific measurement can be made.
80
The heating value isthe amount of heat produced by combustion of a unit quantity of a fuelWe differentiate between gross and net heating values:Gross (or high, upper) Heating ValueThe gross or high heating value is the amount of heat produced by the complete combustion of a unit quantity of fuel. The gross heating value is obtained whenall products of the combustion are cooled down to the temperature before the combustionthe water vapor formed during combustion is condensedNet (or lower) Heating ValueThe net or lower heating value is obtained by subtracting the latent heat of vaporization of the water vapor formed by the combustionfrom the gross or higher heating value.For further information Contact: Tauseef Awan email adress microengineer.tauseef@gmail.com mob:+92306-8859595