Want this question answered?
Very
That's backwards, as a washer is much heavier than a dryer, particularly when it's full of water. There are over/under units, but you can't simply set a regular dryer on top of a regular washer (or vice versa, which is a bad idea anyway).
absolutly yes cause its dryer than regular water
Yes you can... have one and plugged into regular wall plug (110v) in USA.
Different plugs are designed so that you can't plug an appliance into the wrong voltage. A dryer is usually 220-240 Volts and your standard outlet is 110-120 Volts. You can't do what you suggest.
The 5 wash settings for the Whirlpool LTE5243D 3.4 CuFt. Electric Washer/Dryer Combo are Super Wash, Regular/Heavy, Permanent Press, Delicate and Prewash settings.
Need to know what type of dryer.
it averages about 160 degrees f.
Very
The settings on a dryer differ by manufacturer. A coin operated dryer has a slide or dial to turn the dryer to a lower temperature. A digital dryer has buttons to push to change the temperature settings. Many dryers just have a dial to turn to select the temperature or timer settings.
a blow job using a hair dryer
140 F'
Yes, and it has a heater inside which increases temperature inside the dryer to accelerate drying.
Permanent press fabric is often used for men's shirts. They can become wrinkled, but a few minutes in the dryer usually irons it out.
That's backwards, as a washer is much heavier than a dryer, particularly when it's full of water. There are over/under units, but you can't simply set a regular dryer on top of a regular washer (or vice versa, which is a bad idea anyway).
A quartz temperature sensor inside a vial in a freeze dryer works by measuring the frequency of the quartz crystal. The quartz crystal is designed to vibrate at a specific frequency when it is exposed to a certain temperature. As the temperature inside the vial changes, the frequency of the quartz crystal changes as well. The frequency is then measured by the temperature sensor and compared to a reference temperature, allowing the freeze dryer to accurately measure and control the temperature of the vial.
Either heat it up in your dryer for 10 to 20 minutes or iron it.