what do yuou think? /:/
between the hub and the rim.
To accurately measure spoke length for your bicycle wheel, you can use a spoke ruler or a spoke length calculator. Measure the distance from the inside of the hub flange to the top of the spoke hole, and then add the hub's flange diameter and the rim's effective rim diameter. This total will give you the correct spoke length needed for your wheel.
To replace a bicycle spoke, first remove the damaged spoke by loosening the nipple at the rim and hub. Measure the length of the spoke and purchase a replacement of the same size. Thread the new spoke through the hub and rim, then tighten the nipple to secure it in place. Finally, true the wheel to ensure it spins smoothly.
A bike hub is mainly turned on a lathe. Spoke holes are drilled and if it's a hub brake or a rear hub there may be some milling too.
To measure spoke length accurately for a bicycle wheel, you can use a spoke ruler or a spoke length calculator. First, determine the hub and rim measurements of your wheel. Then, input these measurements into the calculator or use the ruler to measure the distance from the hub to the rim hole. This will give you the correct spoke length needed for your wheel.
To replace a broken spoke on your bicycle wheel, you will need to remove the tire and inner tube, then remove the broken spoke from the hub and rim. Next, insert the new spoke into the hub and thread it through the rim, making sure it is the correct length. Finally, tighten the spoke using a spoke wrench until it is secure, and reassemble the tire and inner tube.
A spoke is a part of a wheel, typically connecting the hub to the rim, providing support and stability to the wheel structure.
A spoke is one of those long thin rods that go between the hub and the rim to make up the wheel.
To replace a spoke on a bicycle wheel, you will need to remove the tire and inner tube, then remove the damaged spoke by unscrewing it from the hub and rim. Next, insert the new spoke into the hub and thread it through the rim, making sure it is properly aligned. Finally, tighten the spoke using a spoke wrench until it is snug but not overly tight. Reinstall the tire and inner tube, and your wheel should be ready to go.
Can't be answered w/o knowing the exact measurements of the hub. Get yourself a ruler and a caliper and I'll post links to some spoke calculators.
A spoke is a rod or bar running from the center of a wheel to the rim, designed to support the wheel and transfer power from the hub to the rim. It helps maintain the structural integrity of the wheel and ensures smooth rotation.
To replace a spoke on your bike, you will need to remove the tire and inner tube, then remove the damaged spoke from the wheel. Next, insert the new spoke into the hub and thread it through the corresponding hole in the rim. Finally, tighten the spoke using a spoke wrench until it is securely in place.